Contents Introduction ....................1 Warnings and Cautions ...................3 Main Unit Descriptions ..................6 Definition and Function Description of Keys on Remote Control ......8 Operation and Function Description of Menu ..........18 Televition Installation ..................26 Troubleshooting ...................28 Computer compatibility chart .................30 Specifications ....................31...
Introduction Thank you very much for your purchase of our LCD TV/Monitor. It serves as a normal colour TV and PC monitor. To enjoy your set fully from the very beginning, please read this manual carefully and keep it handy for further reference. Installation Locate the receiver in the room where direct light does not strike the screen.
Page 4
Introduction Notice This appliance is not intended for use by children or other persons without assistance or supervision if their physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to ensure that they do not play with the appliance.
Warnings and Cautions Warning High voltages are used in the operation of this product. Do not remove the back cover of the cabinet. Refer servicing to qualified service personnel. Warning To prevent fire or electrical shock hazard, do not expose the main unit to rain or moisture.
Page 6
Warnings and Cautions Minimum distances Caution 10cm 10cm If the television is to be built into a compartment or 20cm similarly enclosed, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous. Caution Never stand on, lean on, push suddenly the product or its stand.
Page 7
Warnings and Cautions Caution When the product is not used for an extended period of time, it is advisable to disconnect the AC power cord from the AC outlet. Caution Avoid exposing the main unit to direct sunlight and other source of the heat.
Main Unit Descriptions Control location 1.Power button 2.Menu button (MENU) 3.Volume up button ( V + ) 4.Volume down button ( V -) 5.Program up button ( P+ ) 6.Program down button ( P- ) 7.TV/AV button (TV/AV) 8.Power indicator 9.Remote sensor TV/AV MENU...
Definition and Function Description of Keys on Remote Control Locations and functions of keys on the RC: SIZE INDEX HOLD REVEAL SUBTITLE CENCEL -/- - MENU SOURCE MUTE SCAN SLEEP CALL FREEZE ZOOM I/II...
Page 11
Definition and Function Description of Keys on Remote Control 1. STANDBY Turn on and off, carry out the function of standby and turn-on. 2. SOURCE HDMI2 HDMI Press [SOURCE], signal source arranges as following: SCART SOURCE SVIDEO YPbPr SCART HDMI SVIDEO YPbPr YPbPr...
Page 12
Definition and Function Description of Keys on Remote Control 4. -/-- Switch the program digit. Press [-/--] to choose the digits of the program number among -/-- 1 2 and 3 before pressing number keys [0]~[9]: the program digits will change as follows: - - - - In the state of two digits entering, the program number will change to the first digit entered if the second digit is not entered within 3 seconds after entering the first one.
Page 13
Definition and Function Description of Keys on Remote Control 7. CALL Show source information: CALL The source of main picture MAIN PICTURE: The number is the program number (when the source is TV) :EXIT The color system of main picture (when the source is AV S-VIDEO or SCART ) The resolution of main picture(when the source is PC or HDMI) It carries out the function of blue key while in CHANNEL LABEL submenu...
Page 14
Definition and Function Description of Keys on Remote Control 9. Picture Mode Setup Press [ |P| ] once, the current picture setup will be shown. Press [ |P| ] repeatedly, picture mode will change as follows: STANDARD DYNAMIC SOFT PERSONAL. It carries out the function of NAME in CHANNEL LABEL submenu.
Page 15
Definition and Function Description of Keys on Remote Control 12. SLEEP Setup the time of auto turning off. Press [SLEEP], then the auto turn- SLEEP off time will change as follows: OFF 15 30 45 60 75 90 105 120 OFF which OFF means to quit sleep function.
Page 16
Definition and Function Description of Keys on Remote Control 15. FREEZE FREEZE Press this key, the picture will freeze and press this key again the picture will return. SCAN Press SCAN, the TV displays in SCAN mode and starts to search SCAN program from the present one.The sub-picture will be switched to the next one after the new program is found.During SCANing all sub-...
Page 17
Definition and Function Description of Keys on Remote Control CHANNEL LABEL NAME SKIP LOCK b.In NAME edit status, use keys to select the object to F216 F248 BBC1 edit ,and use keys to edit the letter. BBC1 F264 F304 TVE2 TVE1 F312 F352...
Page 18
Definition and Function Description of Keys on Remote Control 20. MIX In the mode of text, it is used to carry out or quit the mixing display mode of text. 21. SIZE SIZE In the mode of text, it is used to change the display scale of text. 22.
Page 19
Definition and Function Description of Keys on Remote Control 25. SUBTITLE In teletext mode, press this key to select subpage.Subpage can be selected by directly entering a 4 -digit number or presing red green or keys.Press this key again to return to normal teletext mode.
Operation and Function Description of Menu A.Menu Operation Under TV/AV/SVIDEO/YPBPR/SCART Input Source 1. PICTURE a.The right picture is the sketch map of the picture menu. b. The definition of each option: 1.CONTRAST: Change the value of contrast with the key / in the rang of 0 to 100.
Page 21
Operation and Function Description of Menu P.S. HUE will only show when the color system is NTSC. Press , enter the picture menu. Press , move cursor to relevant item. Press , tune value. SOUND a. The right picture is the sketch map of the sound menu. SOUND b.
Page 22
Operation and Function Description of Menu 3. ADVANCE ADVANCE a. Using / key under ADVANCE menu to move cursor to STRONG relevant item, then change the options by pressing key. TTX LANGUAGE WEST b. Introduction to each item: AUTO FORMAT LOCK 1.
Page 23
Operation and Function Description of Menu 3-4. LOCK: If LOCK is set ON, the settings of AV LOCK ADVANCE HOTEL LOCK and VOLUME LIMIT is active, otherwise not. PASSWORD ---- 3-5. AV LOCK: When it is OFF, AV LOCK is functionless; NEW PASSWORD ---- CONFIRM PASSWORD...
Page 24
Operation and Function Description of Menu 4. SYSTEM SYSTEM SYSTEM a. The right picture is the sketch map of the SYSTEM menu. b. The definition of each option: LANGUAGE ENGLISH BLUE SCREEN H .POS 1.OSD Language Select the language of the OSD menu by V .POS DURATION press...
Page 25
Operation and Function Description of Menu 2-3. TIMER: Adjust the update time of each picture shown on the screen with the key SCAN mode in the rang of 0 to 100. 8. DEFAULT: Set Picture Mode and Sound Mode to standard; Set volume to 20 and set OSD Position to the default position.
Page 26
Operation and Function Description of Menu 5. FINE TUNING Press for fine tuning. 6. SKIP: When it is OFF, skip is not available; if it is ON, the present program could be skipped through [P+][P-], but it could be Achieved through [-/--] and [0]~[9], and program No. is red 7.
Page 27
Operation and Function Description of Menu B.Menu Operation in PC/HDMI State. 1.When signal source is switched to PC/HDMI, a PC/HDMI mark will be displayed on the up-right corner of the screen. 2. In the state of PC/HDMI, if there is no signal, NO SYNC will be displayed in the middle of the screen ,and TV set auto turns off in ten minutes.
Television Installation Connect antenna or video facility 1.Use 75 coaxial cable plug or 300-75 impedance converter to plug in antenna input terminal on the rear of the cabinet. 2.Connect the video facility to the audio, video in jack on the rear of the cabinet. VHF Antenna UHF Antenna Input terminal of antenna...
Page 29
Television Installation Battery installation & replacement for remote control unit. The remote control uses two 1.5V AAA batteries. For battery installation and replacement are as following: 1. Turn the remote control unit upside down. Open the battery compartment cover. 2. Install two new batteries, make sure that battery polarity matches with the marks inside the battery.
Items Relevant illustrations MIX lifetime backlight 50,000 hours Number of Pixels 1366X 768 pixel Channel and frequencies VHFL: 46.25 to 168.25 MHz; VHFH: 175.25 to 463.25 MHz; UHF: 471.25 to 863.25 MHz. Color standard PAL, SECAM Sound standard D/K, BG, I, L/L’ Features Teletext 100 page storage, pan European standard...