Table of Contents
Advertisement
Receiver connection diagram
Caution: Before racing boat,
Please use balloon supplied
in tool bag to wrap receiver
for water proofing.
Installing the Battery
1. Rotate the plastic lock on
hatch 90 degrees either to
left or right.
2. Lift up and remove the hatch.
3. Attach battery connector.
NOTE: We recommend you 2 packs of 7.4V 4000mAh
30C+ Lipo battery for maximum performance.
Using the provided battery straps which are
already installed on the battery locators inside
the hull to secure the battery. The battery
locators help align the batteries for the best
running
center
performance. Below are the batteries location
inside the hull.
NOTE: There is a water proof rubber ring glued along
the slot of hull, always make sure it's securely
positioned before re-install the upper deck.
1
of
gravity
for
maximum
Scottfree battery locator
5
Advertisement
Table of Contents
