Table of Contents
Advertisement
Audio Setup Page
Analog Output
Digital Audio Setup
1dvp3260K_98_eng1.indd 35
Setup Menu Options
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device or TV using the analog
output jack.
{ LT/RT }
–
{ Stereo }
–
{ V SURR }
–
This setting is only required if you have connected the audio
output of this unit to an amplifier/receiver using the digital
output jack.
{ Digital Output } –
{ LPCM Output } –
Note: LPCM Output can only be selected when { PCM Only } is
activated. The higher the sampling rate, the better the sound
quality.
The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
The connected device can only output
stereo audio through two speakers.
For virtual surround sound effects.
{ SPDIF Off }
Disable digital audio output. Select this
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
{ All }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(-channel).
{ 48 K }
Select this to play disc recorded at
sampling rate of 8 kHz.
{ 96 K }
Enable 96 kHz output on digital audio if
the amplifier/receiver is compatible
with high sampling rate audio (88. / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to '8 K'.
(continued)
5
2008-04-18 9:39:25 AM
Advertisement
Table of Contents
