Table of Contents
Advertisement
Setup Menu Options
Audio Setup Page
Analog Output
Digital Audio Setup
34
dvp3980_75_eng4_final809.indd 34
dvp3980_75_eng4_final809.indd 34
(continued)
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device or TV using the analog
output socket.
{ LT/RT }
–
{ Stereo }
–
{ V SURR }
–
This setting is only required if you have connected the audio
output of this unit to an amplifi er/receiver using the digital
output socket.
{ Digital Output } –
{ LPCM Output } –
Notes:
– Digital Audio Setup setting is only available if HDMI Audio is set
to { Off }.
– LPCM Output can only be selected when { PCM Only } is
activated. The higher the sampling rate, the better the sound quality.
The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
The connected device can only output
stereo audio through two speakers.
For virtual surround sound effects.
{ Off }
Disable digital audio output. Select this
if you are using the analog audio
sockets to connect this unit to a TV or
Stereo system.
{ ALL }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals are
downmixed to PCM format (2-channel).
{ 48 K }
Select this to play disc recorded at
sampling rate of 48kHz.
{ 96 K }
Enable 96 kHz output on digital audio if
the amplifi er/receiver is compatible
with high sampling rate audio (88.2 / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to '48 K'.
2008-02-27 10:39:49 AM
2008-02-27 10:39:49 AM
Advertisement
Table of Contents
