Table of Contents
Advertisement
Setup Menu Options
Audio Setup Page
Analog output
Digital Audio Setup
34
1_dvp6620-88_93_eng1_final813.in34 34
1_dvp6620-88_93_eng1_final813.in34 34
(continued)
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device or TV using the analog
output socket.
{ LT/RT }
{ Stereo }
{ V SURR }
This setting is only required if you have connected the audio
output of this unit to an amplifi er/receiver using the digital
output socket.
{ Digital Output }
{ LPCM Output }
– The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
– The connected device can only output
stereo audio through two speakers.
– For virtual surround sound effects.
– { Off }
Disable digital audio output. Select this
if you are using the analog audio
sockets to connect this unit to a TV or
Stereo system.
{ ALL }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(2-channel).
– { 48 kHz }
Select this to play disc recorded at
sampling rate of 48kHz.
{ 96 kHz }
Enable 96 kHz output on digital audio if
the amplifi er/receiver is compatible
with high sampling rate audio (88.2 / 96
kHz). However, if the sound output is
distorted or there is no sound, change
the setting to '48 kHz'.
2008-03-24 2:32:33 PM
2008-03-24 2:32:33 PM
Advertisement
Table of Contents
