Remote Control
Using the remote control
Open the battery compartment.
A
Insert two batteries type R0 or AAA,
B
following the indications (+-) inside
the compartment.
Close the cover.
C
Point the remote control directly at the
D
remote sensor (IR) on the front panel.
Note:
Never place any objects between the
remote control and this unit while
operating.
Select the desired function (for example
E
u).
1
1dvp3260K_98_eng1.indd 12
(continued)
CAUTION!
– Remove batteries if they are
exhausted or if the remote control
is not to be used for a long time.
– Never mix batteries (old and new
or carbon and alkaline, etc.).
– Batteries contain chemical
substances; they should be disposed
of properly.
2008-04-18 9:39:15 AM