1. Manuals
  2. Brands
  3. QNO Manuals
  4. Network Router
  5. 2WAN 3LAN
  6. User manual

QNO 2WAN 3LAN User Manual

Vpn qos security router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Load Balance, Bandwidth Management, VPN, and Network Security
VPN QoS Security Router
VPN
VPN
VPN
QoS Security Router
QoS Security Router
QoS Security Router
2 2 2 2 WAN
WAN 3 3 3 3LAN
WAN
WAN
LAN
LAN
LAN
English User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2WAN 3LAN and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for QNO 2WAN 3LAN

Summary of Contents for QNO 2WAN 3LAN

  • Page 1 2 2 2 2 WAN WAN 3 3 3 3LAN VPN QoS Security Router QoS Security Router QoS Security Router QoS Security Router Load Balance, Bandwidth Management, VPN, and Network Security English User’s Manual...
  • Page 2 Manual, and the relevant rights and obligations between the users and Qno Technology Inc (hereafter "Qno"), and is the exclusion to remit or limit the liability of Qno. The users who obtain the file of this manual directly or indirectly, and users who use the relevant services, must obey this Agreement.
  • Page 3 If it is not solved by consultation, user agrees that the dissension or dispute is brought to trial in the jurisdiction of the court in the location of Qno. In Mainland China, the "China International Economic and Trade Arbitration Commission" is the arbitration organization.

  • Page 4: Table Of Contents

    2WAN 3LAN VPN QoS Security Router Content I. Introduction..............................1 II. Hardware Installation ..........................2 2.1 VPN QoS Router LED Signal ........................2 2.2 VPN QoS Router Network Connection ....................3 III. Quick Configuration..........................5 3.1 Login and Set Up ............................5 3.2 Home Page..............................5 3.2.1 System Information.........................
  • Page 5 IX. Log Configuration..........................87 9.1 System Log..............................87 9.2 System Statistics............................89 9.3 Traffic Statistic............................90 9.4 Specific IP/ Port Status .......................... 92 X. Logout ...............................96 Appendix I: VPN setting Sample.........................97 Appendix II： ： ： ： Qno Technical Support Information ................101...

  • Page 6: I. Introduction

    NAT, it has DoS (Denial of Service), and SPI (Stateful Packet Inspection). Also it could use the default setting to automatically detect the Internet network attack. And, Qno is a supporter of the IPSec Protocol. IPSec VPN provides DES(56bit), 3DES(168bit), MD5 & SHA certification. VPN QoS Router also has unique QVM VPN- SmartLink IPSec VPN.

  • Page 7: Ii. Hardware Installation

    2WAN 3LAN VPN QoS Security Router II. Hardware Installation In this chapter we are going to introduce hardware interface as well as physical installation. 2.1 VPN QoS Router LED Signal LED Signal Description Color Description Green Green LED on: Power ON...

  • Page 8: Vpn Qos Router Network Connection

    2WAN 3LAN VPN QoS Security Router We suggest to either place VPN QoS Router on a desk or install it in a rack with attached brackets. Do not place other heavy objects together with VPN QoS Router on a rack.
  • Page 9 2WAN 3LAN VPN QoS Security Router Users can use servers for monitoring or filtering through the port after “Physical Port Mangement” configuration is done. DMZ : The DMZ port can be connected to servers that have legal IP addresses, such as Web...

  • Page 10: Iii. Quick Configuration

    2WAN 3LAN VPN QoS Security Router III. Quick Configuration In this chapter we are going to introduce software setting interface, explaining the message of home page as well as basic connection setting. 3.1 Login and Set Up VPN QoS Router default username and password are both “admin”. Users can change the login password in the setting later.

  • Page 11: Port Statistics

    2WAN 3LAN VPN QoS Security Router Serial No. This number is the device serial number. Firmware version Information about the device present software version. CPU (Central Processing Unit) Indicates the device CPU model No.: Intel IXP425-533MHz System active time: Indicates how long the device has been running.

  • Page 12: General Setting Status

    2WAN 3LAN VPN QoS Security Router The current port setting status information will be shown in the Port Status Table. Examples: Network connection, port (on or off), priority (high or normal), connection speed (10Mbps or 100Mbps), duplex status (half-duplex or full duplex), and auto negotiation (Enabled or Disabled).

  • Page 13: Advanced Setting Status

    2WAN 3LAN VPN QoS Security Router configuration. 3.2.4 Advanced Setting Status DMZ Host: Indicates if DMZ is activated. Click the hyperlink to enter and manage the configuration. The default configuration is “Disabled”. Working Mode: Indicates the the device current operation mode (either Gateway mode or Router mode).

  • Page 14: Vpn Setting Status

    2WAN 3LAN VPN QoS Security Router enter and manage the configuration. The default configuration is “Off”. Remote Management: Indicates if remote management is activated (on or off). Click the hyperlink to enter and manage the configuration. The default configuration is “Off”.
  • Page 15 2WAN 3LAN VPN QoS Security Router Host Name and Domain Name Device name and domain name can be input in the two boxes. Though this configuration is not necessary in most environments, some ISPs in some countries may require it.
  • Page 16 2WAN 3LAN VPN QoS Security Router DMZ ports act as bridges between the Internet and LANs. Subnet： The DMZ and WAN located in different Subnets For example: If the ISP issued 16 real IP addresses: 220.243.230.1-16 with Mask 255.255.255.240, users have to separate the 16 IP addresses into two groups: 220.243.230.1-8 with Mask 255.255.255.248, and 220.243.230.9-16 with Mask 255.255.255.248 and then set the...
  • Page 17 2WAN 3LAN VPN QoS Security Router WAN Connection Type Obtain an IP automatically This mode is often used in the connection mode to obtain an automatic DHCP IP. This is the device system default connection mode. It is a connection mode in which DHCP clients obtain an IP address automatically, which is often applied in Cable Modem or DHCP Client connection mode, etc.
  • Page 18 2WAN 3LAN VPN QoS Security Router Specify WAN Input the available static IP address issued by ISP. IP address: Subnet Mask: Input the subnet mask of the static IP address issued by ISP, such Issued eight static IP addresses: 255.255.255.248 Issued 16 static IP addresses: 255.255.255.240...

  • Page 19: Dual Wan

    2WAN 3LAN VPN QoS Security Router User Name: Input the user name issued by ISP. Password Input the password issued by ISP. Connect This function enables the auto-dialing function to be used in a Demand: PPPoE dial connection. When the client port attempts to connect with the Internet, the device will automatically make a dial connection.
  • Page 20 2WAN 3LAN VPN QoS Security Router Network Service Detection System: This is a detection system for network external services. If this option is selected, information such “Retry Count” or “Retry Timeout” will be displayed. If two WANs are used for external connection, be sure to activate the NSD system, so as to avoid any unwanted break caused by the device misjudgment of the overload traffic for the WAN.
  • Page 21 2WAN 3LAN VPN QoS Security Router connections has failed; the traffic going through this WAN to the destination IP cannot shift to another WAN to reach the destination. For example, if users want the traffic to 10.0.0.1 ~ 10.254.254.254 to go only through WAN1, while WAN2 is not to support these destinations, users should select this option.
  • Page 22 2WAN 3LAN VPN QoS Security Router Remote Server: This is the detected location for the remote Network Segment. This Remote Host IP should better be capable of receiving feedback stably and speedily. (Please input the DNS IP of the ISP port).
  • Page 23 2WAN 3LAN VPN QoS Security Router Service: This is to select the Binding Service Port to be activated. The default (such as ALL-TCP&UDP 0~65535, WWW 80~80, FTP 21 to 21, etc.) can be selected from the pull-down option list. The default Service is All 0~65535.
  • Page 24 2WAN 3LAN VPN QoS Security Router restricted to WAN1, the external static IP address 210.1.1.1 ~ 210.1.1.1 should be input. If a range of destinations is to be assigned, input the range such as 210.11.1.1 ~ 210.11.255.254. This means the Class B Network Segment of 210.11.x.x will be restricted to a specific WAN.
  • Page 25 2WAN 3LAN VPN QoS Security Router Service Name: In this box, input the name of the Service Port which users want to activate, such as BT, etc. Protocol: This option list is for selecting a packet format such as TCP or UDP for the Service Ports users want to activate.
  • Page 26 2WAN 3LAN VPN QoS Security Router 3.3.3 QoS QoS is an abbreviation for Quality of Service. The main function is to restrict bandwidth usage for some services and IPs to save bandwidth or provide priority to specific applications or services, and also to enable other users to share bandwidth, as well as to ensure stable and reliable network transmission.
  • Page 27 2WAN 3LAN VPN QoS Security Router In addition, if any Intranet PC is attacked by a virus like Worm.Blaster and sends a huge number of connection requests, session control will restrict that as well.
  • Page 28 2WAN 3LAN VPN QoS Security Router Disable: To disable Session Control function. Single IP cannot This option enables the restriction of maximum external exceed ___ Session connections to each Intranet PC. When the number of external connections reaches the limit, to allow new connections to be built, some of the existing connections must be closed.
  • Page 29 2WAN 3LAN VPN QoS Security Router Exempted Port or IP The important services or IPs in a company or business Service: can be configured to be free of the Connection Restriction Rule. Service: To select a Service Port to be free of the connection rule.
  • Page 30 2WAN 3LAN VPN QoS Security Router Interface: To select on which WAN the QoS rule should be executed. It can be a single selection or multiple selections. Service: To select what bandwidth control is to be configured in the QoS rule.
  • Page 31 2WAN 3LAN VPN QoS Security Router Intranet users that connect with the device are to be controlled, input “0” in the boxes of IP address. This means all Intranet IPs will be restricted. QoS can also control the range of Class B.
  • Page 32 2WAN 3LAN VPN QoS Security Router much bandwidth, users can select the “Share-Bandwidth Mode”, so that no matter how much users use FTPs to download information, the total occupied bandwidth is fixed. Enable: To activate the rule. Add To List: To add this rule to the list.
  • Page 33 2WAN 3LAN VPN QoS Security Router Interface： ： ： ： Select on which WAN the QoS rule should be executed. It can be a single selection or multiple selections. Service Port： ： ： ： Select what bandwidth control is to be configured in the QoS rule. If FTP uploads or downloads need to be controlled, select “FTP Port...

  • Page 34: Password

    2WAN 3LAN VPN QoS Security Router High: 60% guaranteed bandwidth to the service Priority： ： ： ： Low: Only 10% bandwidth offered to the service Enabled： ： ： ： Activate the rule. Add to list： ： ： ： Add this rule to the list.

  • Page 35: Time

    2WAN 3LAN VPN QoS Security Router User Name: The default is “admin”. Old Password: Input the original password. New User Name: Input the new user name. New Password: Input the changed password. Confirm New Input the new password again for verification.
  • Page 36 2WAN 3LAN VPN QoS Security Router Input Date and Time Manually Input the correct date and time in the boxes.
  • Page 37 2WAN 3LAN VPN QoS Security Router After the changes are completed, click “Apply” to save the configuration, or click “Cancel" to leave without making any changes.

  • Page 38: Iv. Advanced Configuration

    2WAN 3LAN VPN QoS Security Router IV. Advanced Configuration This chapter introduces the VPN QoS Router advanced configuration, including opening the link of virtual server, routing setting, physical IP corresponding to virtual IP as well as setting dynamic DNS, etc.

  • Page 39: Forwarding

    2WAN 3LAN VPN QoS Security Router modification, or click “Cancel" to leave without making any changes. 4.2 Forwarding Setting up a Port Forwarding Virtual Host: If the server function (which means the server for an external service such as WWW, FTP, Mail, etc) is contained in the network, we recommend...
  • Page 40 2WAN 3LAN VPN QoS Security Router 21~21 for FTP. Please refer to the list of default service ports. Internal IP Address: Input the virtual host IP addresses. Enable: To activate this function. Service Add or remove service ports from the list of service ports.
  • Page 41 2WAN 3LAN VPN QoS Security Router Service Name: In this box, input the name of the Service Port which users want to activate, such as BT, etc. Protocol: This option list is for selecting a packet format such as TCP or UDP for the Service Ports users want to activate.

  • Page 42: Upnp- (Universal Plug And Play)

    2WAN 3LAN VPN QoS Security Router Application Name: Users can define names for special application software. This is to make management simple. Trigger Port Range: Input the port numbers for data going from the device to the Internet. (Such as 9000~6600).
  • Page 43 2WAN 3LAN VPN QoS Security Router Service Port： ： ： ： Select the UPnP service number default list here; for example, WWW is 80~80, FTP is 21~21. Please refer to the default service number list. Host Name or IP Input the Intranet virtual IP address or name that maps with Address：...

  • Page 44: Routing

    2WAN 3LAN VPN QoS Security Router 4.4 Routing When there are more than one router and IP subnets, the routing mode for the device should be configured as static routing. Static routing enables different network nodes to seek necessary paths automatically. It also enables different network nodes to access each other. Click the button “Show Routing Table”...

  • Page 45: One-To-One Nat

    2WAN 3LAN VPN QoS Security Router Interface： This is to select “WAN port” or “LAN port” for network connection location. Add to list / Delete Add the routing rule into the list or remove the selected selected IP： ： ： ：...
  • Page 46 2WAN 3LAN VPN QoS Security Router One to One NAT： To enable or close the One-to-One NAT function. (Check to “Enable” or “Close” the function). Private IP Range Input the Private IP address for the Intranet One-to-One NAT Begin： ： ： ：...

  • Page 47: Ddns- Dynamic Domain Name Service

    PPPoE time-based system or the actual IP of a cable modem will be changed from time to time. To overcome this problem for users who want to build services such as a website, it offers the function of dynamic web address transfer. This service can be applied from www.qno.cn/ddns, www.3322.org, www.dyndns.org, or www.dtdns.com, and these are free.
  • Page 48 2WAN 3LAN VPN QoS Security Router DDNS Check either of the boxes before DynDNS.org, 3322.org, DtDNS.com and QnoDDNS.org.cn to select one of the four DDNS website address transfer functions. User name The name which is set up for DDNS. Input a complete website address such as abc.qnoddns.org.cn as a user name for QnoDDNS.

  • Page 49: Mac Clone

    2WAN 3LAN VPN QoS Security Router Internet IP Address Input the actual dynamic IP address issued by the ISP. Status An indication of the status of the current IP function refreshed by DDNS. Apply After the changes are completed, click “Apply” to save the network configuration modification.

  • Page 50: Dhcp Ip Issuing Server

    2WAN 3LAN VPN QoS Security Router User Defined WAN The default MAC location of the current equipment. MAC Address: MAC Address from Current address of MAC that is connected with this PC. connected device: Apply After the changes are completed, click “Apply” to save the network configuration modification.

  • Page 51: Ip & Mac Binding

    2WAN 3LAN VPN QoS Security Router Client Lease Time: This is to set up a lease time for the IP address which is acquired by a PC. The default is 1440 minutes (a day). Users can change it according to their needs. The time unit is minute.
  • Page 52 2WAN 3LAN VPN QoS Security Router Static IP: There are two ways to input static IP: If users want to set up a MAC address to acquire IP from DHCP, but the IP need not be a static IP, input 0.0.0.0 in the boxes.
  • Page 53 2WAN 3LAN VPN QoS Security Router client that is to be bound. The maximum acceptable characters are 12. Either Chinese or English can be accepted. Enabled: To activate this configuration. Add To List: To add the configuration or modification to the list.

  • Page 54: Dns & Wins Server

    2WAN 3LAN VPN QoS Security Router Click “Edit” to set binding rule 4.8.3 DNS & WINS Server This is for checking the DNS from which an IP address has been leased to a PC port. If you have specific DNS Server, input the IP address of this server directly. As an IP address has been leased to a PC port, it also gets designated DNS Server address.
  • Page 55 2WAN 3LAN VPN QoS Security Router This is an indication list of the current status and setup record of the DHCP server. The indications are for the administrator’s reference when a network modification is needed. DHCP Server： ： ： ：...

  • Page 56: V. Tool Configuration

    2WAN 3LAN VPN QoS Security Router V. Tool Configuration This chapter introduces the management tool for controlling the device and testing network connection. 5.1 Diagnostic The device provides a simple online network diagnostic tool to help users troubleshoot network-related problems. This tool includes DNS Name Lookup (Domain Name Inquiry Test) and Ping (Packet Delivery/Reception Test).

  • Page 57: Restart

    2WAN 3LAN VPN QoS Security Router 5.2 Restart As the figure below, if clicking “Restart Router” button, the dialog block will pop out, confirming if users would like to restart the device. 5.3 Return to Factory Default Setting Select “Return to Factory Default Setting” to reset all the settings and restart the device.

  • Page 58: Firmware Upgrade

    2WAN 3LAN VPN QoS Security Router 5.4 Firmware Upgrade Users may directly upgrade the device firmware on the Firmware Upgrade page. Please confirm all information about the software version in advance. Select and browse the software file, click "Firmware Upgrade Right Now" to complete the upgrade of the designated file.

  • Page 59: Setting Backup

    2WAN 3LAN VPN QoS Security Router 5.5 Setting Backup...
  • Page 60 2WAN 3LAN VPN QoS Security Router configuration file Import This feature allows users to integrate all backup content of parameter settings into the device. Before upgrade, confirm all information about the software version. Select and browse the backup parameter file: "config.exp." Select the file and click "Import" to import the file.

  • Page 61: Vi. Firewall Configuration

    2WAN 3LAN VPN QoS Security Router VI. Firewall Configuration This chapter introduces the option of firewall setting as well as the setting of network access and control. 6.1 General Settings The firewall is enabled by default. If the firewall is set as disabled, features such as SPI, DoS, and outbound packet responses will be turned off automatically.
  • Page 62 2WAN 3LAN VPN QoS Security Router the network layer. By executing the dynamic authentication for each connection, it will also perform an alarming function for application procedure. Meanwhile, the packet authentication firewall may decline the connections which use non-standard communication protocol.

  • Page 63: Access Rule

    2WAN 3LAN VPN QoS Security Router PPPoE is the most common condition. (ADSL PPPoE MTU Size: 1492).But the MTU Size of many users of Servers and ADSL PPPoE are identical. Generally, the default value of Auto is good enough and further settings are not necessary.
  • Page 64 2WAN 3LAN VPN QoS Security Router internal. Users may set different packets for IP address and communication port numbers to filter Internet access rules. Network access rule follows IP address, destination IP address, and IP communications protocol status to manage the network packet traffic and make sure whether their access is allowed by the firewall.
  • Page 65 2WAN 3LAN VPN QoS Security Router...

  • Page 66: Add A New Rule

    2WAN 3LAN VPN QoS Security Router In addition to the default rules, all the network access rules will be displayed as illustrated above. Users may follow or self- define the priority of each network access rule. Click on Edit to define the network access rule item and press Delete to remove the item.
  • Page 67 2WAN 3LAN VPN QoS Security Router Management： ： ： ： drop-down menu, press – Service Management to add the new service. From the pop-up window, enter a service name and communications protocol and port, and then click the “Add to list”...

  • Page 68: Vii. Vpn Configuration

    2WAN 3LAN VPN QoS Security Router VII. VPN Configuration 7.1 Display All VPN Summary This VPN Summary displays the real-time data with regard to VPN status. These data include: all tunnel numbers (PPTP, IPSec + QnoKey and IPSec VPN), setting parameters and Group VPN and so forth.
  • Page 69 2WAN 3LAN VPN QoS Security Router Tunnel Status： ： ： ： Add New Tunnel： ： ： ： The device supports Gateway to Gateway tunnel or Client to Gateway tunnel. The VPN tunnel connections are done by 2 VPN devices via the Internet. When a new tunnel is added, the setting page for Gateway to Gateway or Client to Gateway will be displayed.
  • Page 70 2WAN 3LAN VPN QoS Security Router ： ： ： ： Client to Gateway Click “Add” to enter the setting page of Client to Gateway. VPN Tunnel Status： ： ： ： The following describes VPN Tunnel Status, the current status of VPN tunnel in detail：...

  • Page 71: Gateway To Gateway Vpn

    2WAN 3LAN VPN QoS Security Router (gateway to gateway as well as client to gateway). Successful connection is indicated as-(Connected). Status： ： ： ： Failing hostname resolution is indicated as - (Hostname Resolution Failed). Resolving hostname is indicated as -(Resolving...

  • Page 72: Tunnel Setup

    2WAN 3LAN VPN QoS Security Router 7.2.1 Tunnel Setup The following instructions will guide users to set a VPN tunnel between two devices. Tunnel No.: To set the embedded VPN feature, please select the Tunnel number. This device supports up to 5 VPN tunnel settings.
  • Page 73 2WAN 3LAN VPN QoS Security Router Gateway Type operation modes, which are: IP only - Authentication by the use of IP only IP + Domain Name (FQDN) Authentication, -IP + Domain name IP + E-mail Addr. (USER FQDN) Authentication,-IP +...
  • Page 74 2WAN 3LAN VPN QoS Security Router don't need to do further settings. Dynamic Domain Name(FQDN) Authentication: If users use dynamic IP address to connect to the device, users may select this option to link to VPN. If the remote VPN...
  • Page 75 2WAN 3LAN VPN QoS Security Router settings. Please select and set appropriate parameters: 1. IP address This option allows the only IP address which is entered to build the VPN tunnel. Reference: When this VPN tunnel is connected, computers with the IP address of 192.168.1.0 can establish connection.
  • Page 76 2WAN 3LAN VPN QoS Security Router Remote Security This remote gateway authentication type comes with five Gateway Type: operation modes, which are: IP only-Authentication by use of IP only IP + Domain Name(FQDN) Authentication, -IP + Domain name IP + E-mail Addr. (USER FQDN) Authentication, -IP +...
  • Page 77 2WAN 3LAN VPN QoS Security Router address can be transcoded through DNS. When users finish the setting, the corresponding IP address will be displayed under the remote gateway of Summary. (2) IP + Domain Name(FQDN) Authentication: If users select IP + domain name, please enter IP address and the domain name to be verified.
  • Page 78 2WAN 3LAN VPN QoS Security Router Or users can choose IP by Multiple DNS Resolved, and IP address can be transcoded through DNS. When users finish the setting, the corresponding IP address will be displayed under the remote gateway of Summary.
  • Page 79 2WAN 3LAN VPN QoS Security Router address can be transcoded through DNS. When users finish the setting, the corresponding IP address will be displayed under the remote gateway of Summary. Dynamic Domain Name(FQDN) Authentication: If users use dynamic IP address to connect with the device, users may select the combination of the dynamic IP address, host name and domain name.

  • Page 80: Ipsec Setup

    2WAN 3LAN VPN QoS Security Router Remote Security This option allows users to set the remote VPN connection Group Type: access type. The following offers a few items for remote settings. Please select and set appropriate parameters: (1) IP address This option allows the only IP address which is entered to build the VPN tunnel.
  • Page 81 2WAN 3LAN VPN QoS Security Router ： ： ： ： IKE with Preshared Key Click the shared key generated by IKE to encrypt and authenticate the remote user. If PFS (Perfect Forward Secrecy) is enabled, the Phase 2 shared key generated during the IKE coordination will conduct further encryption and authentication.
  • Page 82 2WAN 3LAN VPN QoS Security Router Manual Mode If the Manual mode is selected, users need to set encryption key manually without negotiation. It is divided into two types: “Encryption KEY” and “Authentication KEY”. Users may ● enter an exchange password made up of either digits or characters. The systems will automatically transcode what users entered into the exchange password and authentication mechanism during the VPN tunnel connection.

  • Page 83: Vpn Advanced

    2WAN 3LAN VPN QoS Security Router identical to those of the connected VPN device. For the Incoming SPI parameters, users must set it the same with the Outgoing SPI string of the remote VPN device. And the Outgoing SPI string must be the same with the coming SPI string of the remote VPN device.

  • Page 84: Client To Gateway & Group Vpn

    2WAN 3LAN VPN QoS Security Router disconnected, the device will disconnect the tunnel automatically and then create new connection. Users can define the transmission time for each DPD message packet, and the default value is 10 seconds. 7.3 Client to Gateway & Group VPN The following describes how an administrator builds a VPN tunnel between devices.
  • Page 85 2WAN 3LAN VPN QoS Security Router with the IP address of 192.168.1.0 can establish connection. (2) Subnet This option allows remote computers in this IP session can be connected when the VPN tunnel is connected. Reference: When this VPN tunnel is connected, only computers with the session of 192.168.1.0 and with subnet...

  • Page 86: Pptp Setting

    2WAN 3LAN VPN QoS Security Router (2) E-mail Addr. (USER FQDN): E-mail address If users select this option, only filling in the E-mail address allows access to this tunnel. (3) Microsoft XP/2000 VPN Client, - Microsoft XP/2000 VPN Client end If users select XP/2000 VPN Client end status, users don't need to do extra settings.
  • Page 87 2WAN 3LAN VPN QoS Security Router Enable PPTP Service: When this option is selected, the point-to-point tunnel protocol PPTP server can be enabled. PPTP Address Please enter PPTP IP address range so as to provide the remote users with an entrance IP into the local network.

  • Page 88: Vpn Pass Through

    2WAN 3LAN VPN QoS Security Router Range: Enter Range Start: Enter the value into the last field. Enter Range End: Enter the value into the last field. User Name: Please enter the name of the remote user. Password: Enter the password and confirm again by entering the new password.
  • Page 89 2WAN 3LAN VPN QoS Security Router IPSec Pass Through: If this option is enabled, the PC is allowed to use VPN- IPSec packet to pass in order to connect to external VPN device. PPTP Pass Through: If this option is enabled, the PC is allowed to use VPN- PPTP packet to pass in order to connect with external VPN device.

  • Page 90: Viii. Qvm Vpn Function Setup

    2WAN 3LAN VPN QoS Security Router VIII. QVM VPN Function Setup The QVM-series device provides three major convenient functions: 1. Smart Link IPSec VPN: Easy VPN setup replaces the conventional complicated VPN setup process by entering Server IP, User Name, and Password.
  • Page 91 2WAN 3LAN VPN QoS Security Router Client： ： ： ： Account ID： ： ： ： Must be identical to that of the remote client end such as QVM100, QVM330 or QVM660. Please enter the remote client user name in either English or Chinese.

  • Page 92: Ix. Log Configuration

    2WAN 3LAN VPN QoS Security Router IX. Log Configuration From the log management and look up, we can see the relevant operation status, which is convenient for us to facilitate the setup and operation. 9.1 System Log Its system log offers three options: system log, E-mail alert and log setting.
  • Page 93 2WAN 3LAN VPN QoS Security Router and type. To apply this feature, enter the system log server name or the IP address into the empty "system log server" field. E-mail： ： ： ： Enabled: If this option is selected, E-mail Warning will be enabled.

  • Page 94: System Statistics

    2WAN 3LAN VPN QoS Security Router 9.2 System Statistics The device has the real-time surveillance management feature that provides system current operation information such as port location, device name, current WAN link status, IP address, MAC address, subnet mask, default gateway, DNS, number of received/ sent/ total packets , number of received/ sent/ total Bytes, Received and Sent Bytes/Sec., total...

  • Page 95: Traffic Statistic

    2WAN 3LAN VPN QoS Security Router 9.3 Traffic Statistic Six messages will be displayed on the Traffic Statistic page to provide better traffic management and control.
  • Page 96 2WAN 3LAN VPN QoS Security Router Inbound IP Address The figure displays the source IP address, bytes per second and percentage. Outbound IP Address The figure displays the source IP address, bytes per second and percentage. Inbound Service The figure displays the network protocol type, destination IP address, bytes per second...

  • Page 97: Specific Ip/ Port Status

    2WAN 3LAN VPN QoS Security Router and percentage. Outbound Service Ports The figure displays the network protocol type, destination IP address, bytes per second and percentage. Inbound Session The figure displays the source IP address, network protocol type, source port, destination IP address, destination port, bytes per second and percentage.
  • Page 98 2WAN 3LAN VPN QoS Security Router BT or P2P software; users may select this feature to inquire users from the port.
  • Page 99 2WAN 3LAN VPN QoS Security Router Specific IP Status Enter the IP address that users want to inquire, and then the entire destination IP connected to remote devices as well as the number of ports will be displayed. Specific Port Status Enter the service port number in the field and IP that are currently used by this port will be displayed.
  • Page 100 2WAN 3LAN VPN QoS Security Router...

  • Page 101: X. Logout

    2WAN 3LAN VPN QoS Security Router X. Logout Click the “Logout” button, which is to terminate VPN QoS Router management meanwile it also terminates the management user interface. If you want to go into this user interface, please repeat the same steps and input administrator’s ID and password.

  • Page 102: Appendix I: Vpn Setting Sample

    2WAN 3LAN VPN QoS Security Router Appendix I: VPN setting Sample VPN Environment Sample 1： ： ： ： Gateway to Gateway Firewall Setting： Firewall General Block WAN Request = Disable VPN Setting： VPN Summary Add New Tunnel Gateway to Gateway...
  • Page 103 2WAN 3LAN VPN QoS Security Router Mask Keying Mode IKE with preshared IKE with preshared Phase 1 DH Group Group 1 Group 1 Phase 1 Encryption Phase 1 Authentication 28，800 Seconds 28，800 Seconds Phase 1 SA Life Time Perfect Forward Secrecy...
  • Page 104 2WAN 3LAN VPN QoS Security Router Local Security Group Type Subnet Mask 255.255.255.0 255.255.255.0 Remote Security Gateway Type Domain Name Remote Security Gateway Type Domain Name Company domain Name Local ID Domain Name Company domain Name Remote Security Gateway Type IP Address 100.100.100.100...
  • Page 105 2WAN 3LAN VPN QoS Security Router Head Office A Home1 (VPN Client Tunnel Name Home1 Interface WAN1 Enable Checked Checked Local Security Group Type Subnet Local Security Group Type IP Address 20.20.20.0 100.100.100.100 Local Security Group Type Subnet Mask 255.255.255.0 255.255.255.255...

  • Page 106: Appendix Ii： ： ： ： Qno Technical Support Information

    2WAN 3LAN VPN QoS Security Router Appendix II：Qno Technical Support Information For more information about the Qno's product and technology, please log onto the Qno's bandwidth forum, refer to the examples of the FTP server, or contact the technical department of Qno's dealers as well as the Qno's Mainland technical center.

Table of Contents