DVD Menu Options
Sharpness
You can personalize your picture colour
by adjusting sharpness.
A
In 'Video Setup Page', press
select { Sharpness }, then press
{ High }
Choose high to make the picture's edge
sharper.
{ Medium }
Choose medium to get a standard
picture.
{ Low }
Choose low to make the picture's edge
softer.
B
Use
to select a setting and press
OK to confi rm.
Brightness/Contrast/Color
Increasing the value will brighten the
picture or vice versa. Choose zero (0)
for average setting.
A
In 'Video Setup Page', press
select { Brightness }, {
{
}, then press
Color
The menu will appear on the TV
screen.
Brightness 0
Contrast
0
Color
0
B
Press
to adjust the setting
that best suits your personal preference.
C
Press OK to confi rm.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
32
01-40_dvp3120_05_eng.indd 32
01-40_dvp3120_05_eng.indd 32
(continued)
to
A
.
B
to
},
Contrast
.
Component
This setting allows you to toggle the
output of the video signal between RGB
(on scart) and Interlace YPbPr.
In 'Video Setup Page', press
select { Component }, then press
{ Interlace }
Select this for Interlace YPbPr
connection.
{ RGB }
Select this for scart connection.
Use
to select a setting and press
OK to confi rm.
Warning:
When the DVD player is set to
YPbPr (YUV), some TV may not
properly synchronise with the
player on the SCART connector.
to
.
2007-01-15 5:23:51 PM
2007-01-15 5:23:51 PM