Using The Video Setup Menu; Video Out; Brightness/ Contrast; Hue - Philips 436 User Manual

Using the Video setup menu

A
In disc mode, press SETUP.
B
Press select { VIDEO SETUP }.
VIDEO SETUP

VIDEO OUT

BRIGHTNESS
CONTRAST

HUE

SATURATION

SHARPNESS

EXIT SETUP
Video Out
A
In 'Video Setup', press
{ VIDEO OUT }, then press
B
Press to highlight one of the
options below,
{ INTERLACE - YUV }
use component video cables (Y/Pb/Pr) to
connect the appliance to the TV set, and
the TV set is set to INTERLACE - YUV.
{ TV - RGB }
use scart cables to connect the appliance
to the TV set, and the TV set is set to TV
- RGB.
{ P-SCAN YPBPR }
use component video cables (Y/Pb/Pr) to
connect the appliance to the TV set, and
the TV set is set to progressive scan.
C
Press to select a setting and press
OK to confi rm.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
01-35 xDV436_12_19_eng4.indd 31 01-35 xDV436_12_19_eng4.indd 31
DVD Menu Options

Brightness/ Contrast

Increasing the value will brighten the
picture or vice versa. Choose six (6) for
average setting.
A
In 'Video Setup', press
{ BRIGHTNESS } or { CONTRAST },
then press
The menu appears.
B
Press
suit your personal preference.
C
Press OK to confi rm.
Hue
Use cursor buttons
slider to adjust the hue of the video
output.
to select
.
Saturation
Use cursor buttons
slider to adjust the saturation of the
video output.
Sharpness
You can personalise your picture colour
by adjusting sharpness.
A
In 'Video Setup', press
{ SHARPNESS } then press
B
Press
OK to confi rm your selection.
(continued)
to highlight
.
to adjust the setting that best
to move the
to move the
to highlight
.
to select a setting, then press
2006-04-26 4:37:30 PM 2006-04-26 4:37:30 PM
31