Progressive - Turning On/Off; Sharpness; Brightness / Contrast / Color - Philips DVP4050/78 User Manual

DVD Setup Menu Options

Progressive - turning on/off

In the progressive scan mode, you can
enjoy the high quality picture with less
flickers. It only works when you have
connected the DVD player's Y Pb Pr jacks
to your TV that supports the progressive
video input. Otherwise, a distorted
picture will appear on the TV. For proper
progressive scan set up, see page 15.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {PROGRESSIVE}, then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.
➜
Follow the instructions shown on the
TV to confirm the selection (if any).
➜
If a distorted picture appears on the TV
screen, wait for 15 seconds for auto
recovery.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
28
01-35_DVP4050_55_Eng2

Sharpness

You can personalize your picture colour
by adjusting sharpness.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {SHARPNESS}, then press 2.
HIGH
Choose high to make the picture's edge
sharper.
MEDIUM
Choose medium to get a standard
picture.
LOW
Choose low to make the picture's edge
softer.
2
Press 3 4 to select a setting, then press
OK to confirm your selection.

Brightness / Contrast / Color

Increasing the value will brighten the
picture or vice versa. Choose zero (0) for
average setting.
1
In 'VIDEO SETUP PAGE', press 3 4 to
highlight {BRIGHTNESS},
{CONTRAST}or {COLOR}, then press 2.
➜
The menu appears.
2
Press 1 2 to adjust the setting that best
suit your personal preference.
3
Press OK to confirm.
28 23/01/06, 3:58 PM