Internal Connectors - Asus P10S WS User Manual

1.2.9

Internal connectors

1. Intel C236 Serial ATA 6 Gb/s connectors (7-pin SATA6G_1-8)
®
These connectors connect to Serial ATA 6 Gb/s hard disk drives via Serial ATA 6 Gb/s
signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10
configuration with the Intel
through the onboard Intel
• These connectors are set to [AHCI Mode] by default. If you intend to create a Serial
ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID
Mode]. Refer to section 3.6.4 PCH Configuration for details.
• Before creating a RAID set, refer to section 5.1 RAID configurations or the manual
bundled in the motherboard support DVD.
• These SATA ports are for data drives only.
• M.2_1 shares SATA ports with SATA6G_5.
• M.2_2 shares SATA ports with SATA6G_6.
ASUS P10S WS
Rapid Storage Technology enterprise (Intel
®
C236 chipset.
®
RSTe)
®
1-23