Analog Output 57 - Philips DVDR985 Owner's Manual

If you connected the DVD Recorder's red and white AUDIO OUT jacks
to a Stereo (or Stereo TV) as shown on pages 10-13, choose a setting for
Analog Output.
You do not need to adjust this setting if you used the DIGITAL AUDIO
OUT (OPTICAL or COAX) jacks on the DVD Recorder.
Check your Stereo and see if it is compatible with Dolby Surround or
TruSurround. Then follow the steps below to choose the Analog Output
setting that is most compatible with your audio equipment (or TV).
1
Press SYSTEM MENU.
to select it.
2
Press 9 repeatedly to select
3 Press 9 to select Analog output, then press :. Analog output
may be selected already. If so, just press : to continue.
4
Press 8 or 9 to select Stereo, Surround, or 3D sound, then
press OK.
Select Stereo to hear stereo sound. This will work with any type
of equipment that has right and left audio jacks (usually red and
white).
Select Surround if your audio equipment is compatible with Dolby
Surround. If it is, usually a Dolby Pro Logic logo will appear on the
equipment.
Select 3D sound if you want to enjoy surround sound but your
equipment is not Dolby Pro Logic compatible.
W X Y
~
1 2 1en
Digital output
G
Analog output s Stereo
Night mode
r
5
Press SYSTEM MENU to remove the menus.
TruSurround and the symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
may be selected. If it is not, press ;
G
, then press :.
Z a
off no off
Sound
L
Surround
3D sound

Analog Output 57

MONITOR
REC/OTR
PREVIOUS
1,5
REVERSE PAUSE SLOW
STOP FSS
2-4
CLEAR SELECT
TIMER
VOL
MUTE
T/C
ZOOM ANGLE SUBTITLE
DIM REPEAT REPEAT
Helpful Hint
• You also can set analog sound
in the Menu Bar. Details are
on page 31.
ON/OFF
NEXT
FORWARD
PLAY
4
CH
A/CH
AUDIO
SCAN