Advertisement
www.collegehillshonda.com
Securing the Bass Speaker System Wire Harness
27. Wrap one EPT sealer around the three connector
joints in the areas shown, then secure them with
three wire ties.
BASS SPEAKER SYSTEM
WIRE HARNESS
28. Using seven wire ties, secure the bass speaker
system wire harness to the vehicle harness in the
areas shown. Make sure that the bass speaker
system wire harness does not interfere with the
torsion bars during the closing and opening of the
trunk lid.
BASS SPEAKER SYSTEM
WIRE HARNESS
VEHICLE
HARNESS
8 of 8
3 EPT SEALERS
3 WIRE TIES
FRONT
871520AH
4 WIRE TIES
FRONT
3 WIRE TIES
871521AH
29. Check that all wire harnesses are routed properly
and all connectors are plugged in.
30. Reinstall all removed parts.
31. Connect the negative cable to the battery and check
operation of all lights and other electrical
accessories.
32. Enter the anti-theft codes for the audio system, and
reset the radio station presets.
33. Reset the clock.
34. Set all the volume control adjustments on the vehicle
audio unit, such as BASS, TREBLE, FADER, and
BALANCE, to the center position.
AII 40181 (0808)
© 2008 American Honda Motor Co., Inc. – All Rights Reserved.
Advertisement
