Pro-Elec HG00923 Instruction Manual page 9

3. Empty the collected water
Note: Do not remove the float from the water tank The water sensor will no longer be able to
detect the water level correctly without the float and water may leak from the tank.
4. If the drainage tank is dirty, wash it with cold or lukewarm water. Do not use detergent,
scouring pads or any other solvent which could lead to damage of the tank and cause water
leakage
5. When replacing the drainage tank, press the tank firmly into place with both hands. If the
tank is not positioned correctly, the TANK FULL sensor will be activated, and the
dehumidifier will not operate.
Continuous water drainage
The unit features a continuous drainage port. By connecting a plastic pipe (with an inner
diameter of 9mm) to it, the water from the dehumidifier can be drained continuously.
8