Step 1: Basic Recorder Connections; Connecting The Antenna Cables - Philips DVDR3450H/ User Manual

SATELLITE
CABLE
A
EXT 2
TV-OUT ANTENNA-IN
B
Connecting the antenna
cables
These connections enable you to watch
and record TV programmes using this
recorder. If the antenna signal is
connected via a VCR, Cable Box or
Satellite Receiver, ensure that these
devices are turned on in order to watch
or record the cable programmes.
If you want to connect to a VCR
and/or Cable Box/Satellite Receiver,
see the chapter "Step 2 : Optional
Connections" for the possible
connections to your TV.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.

Step 1: Basic Recorder Connections

ANTENNA
AUX - I/O EXT 1 TO TV - I/O
VIDEO (CVBS)
OUTPUT
L
R
COAXIAL
S-VIDEO (Y/C) AUDIO (DIGITAL AUDIO)
TV
A
Connect the existing Antenna/Cable TV
signal (or from the Cable Box/Satellite
Receiver {RF OUT or TO TV}) to the
ANTENNA-IN
recorder.
B
Use the supplied RF coaxial cable to
connect the TV-OUT
recorder to the antenna input socket (or
labelled as VHF/UHF RF IN) on your TV.
Helpful Hint:
– Depending on how you have currently
connected your TV (directly from an
off-air antenna or Cable box or VCR), you
will have to disconnect some of the cables
before you make the above connection.
socket on the
socket on the
15