Connecting The Audio Cables - Philips DVDR3400 User Manual

Step 1: Basic Recorder Connections
EXT 2
TV-OUT ANTENNA-IN
STEREO / TV

Connecting the audio cables

This connection enables you to listen to
the playback from this recorder.
However, this connection is not required
if this recorder is connected to the TV
using the SCART or HDMI cable.
Option 1: Using an audio cable
You can connect the recorder to a two
channel stereo system (mini system, TV)
or receiver in order to enjoy the stereo
sound system.
Use an audio cable (red/white ends - not
supplied) to connect the AUDIO L/R
OUTPUT sockets to the audio input
sockets of the connected device.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
18
EXT 1
AUX - I/O TO TV - I/O
Option 1
(continued)
VIDEO (CVBS)
OUT 1 L
OUT 2 R
COAXIAL
S-VIDEO (Y/C) AUDIO (DIGITAL AUDIO)
Option 2
DIGITAL IN
AV amplifi er/
receiver
Option 2: Using a coaxial cable
You can connect the recorder to an AV
amplifi er/receiver with a digital
multichannel sound decoder in order to
enjoy multichannel surround sound.
Use a coaxial cable (not supplied).
Connect the COAXIAL (DIGITAL
AUDIO OUT) socket on the recorder
to the digital input of the receiver/
amplifi er.
Before you start operating, set the digital
audio output settings accordingly (see the
chapter "DVD Setup Menu Options -
PLAYBACK settings). If the audio setting
does not match your stereo's capabilities,
the stereo may produce a strong,
distorted sound or no sound at all.
OUTPUT
HDMI
OUT 3