Step 3: Installation And Setup; Finding The Correct Viewing Channel; Setting The Osd Language - Philips DVDR3400 User Manual

Step 3: Installation and Setup

Before you start...
When you complete the
connections and turn on the
recorder for the fi rst time, it is
advisable that you make several
basic settings.
Please see the following pages on using
the system setup menu features to
programme TV channels, menu language
and system clock settings. This will
optimise the performance of this
recorder.
Finding the correct viewing
channel
A
Press STANDBY-ON on the recorder
to switch it on.
B
Switch on the TV and set it to the
correct video-in channel. You should see
the blue DVD background screen.
You may go to Channel 1 on your TV,
then press the Channel Down button on
your TV's remote control until you see
the Video In channel.
°
You may press
on your TV's remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.
TIPS: Press to access the options of an item in the menu.
Press SETUP to exit the menu.
24
button repeatedly

Setting the OSD language

Select the menu language for this
recorder's on-screen display. The
language options are different depending
on your country or region. It may not
correspond to the illustrations shown in
the user manual.
Language settings can only be changed
when there is no disc in the disc tray.
SOURCE SOURCE USB USB
TOOLS TOOLS SELECT SELECT
DISC MENU DISC MENU
OK
A
Press SETUP.
The setup menu appears.
B
Use keys to highlight
{ Setup Menu - General } and press
REC MODE TIMER
to access the menu.
Setup Menu - General
Country
On Screen Display Language
Screen Saver
Reset Menu Settings
C
Use keys to highlight { On Screen
Display Language } and press OK to
access its options.
D
Use keys to highlight the desired
language and press OK to confi rm.
OPEN/CLOSE OPEN/CLOSE
TV/DVD TV/DVD
ç
CLEAR CLEAR REPEAT REPEAT
SETUP
PLAY PLAY
EDIT VIDEO Plus+
Germany
English
On
OK