Installation DECORATOR PANEL KIT PSPK25D (WW, BB, CC, SS) Instructions USE WITH: GE Models PSH25MG, PSH25NG and PSH25PG If you have questions, call 800.GE.CARES (800.432.2737) or visit our website at: www.ge.com PSPK25DM WATER CRUSHED CUBED QUICK ICE LOCK CONTROL DOOR ALARM...
Page 2
INSTALLING DECORATOR PANEL KIT The following instructions outline the procedure to install Tools Needed For Installation: Decorator Panel Kit PSPK25D on your refrigerator models: PSH25MG, PSH25NG and PSH25PG. Read each step thoroughly before proceeding. T-20 Torx Driver The procedure below describes installation on models Hinge Cover Screw Cut-Out equipped with a dispenser.
Page 3
INSTALLING AND REMOVING PREVIOUSLY INSTALLED GE DECORATOR PANELS In order to remove the decorator panels and replace with new STEP 3: REPLACE THE TOP TRIM, panels, you need to remove the handles. A T-20 Torx driver is MAKING SURE IT FITS OVER THE needed.
Page 4
WARNING STABILITY PRECAUTION The refrigerator is much heavier with decorator door panels. To prevent the refrigerator from tipping over, you must do one of the following: Install the refrigerator in an alcove or wall recess with a soffit height of 72-1/4” (1835 mm). Install a 2”...
Need help?
Do you have a question about the PSPK25D WW and is the answer not in the manual?
Questions and answers