Usb Connector - Optical Systems OSD2251P SERIES Operator's Manual

OPTICAL SYSTEMS DESIGN
2.2.6

USB CONNECTOR

The OSD2251P has a USB – Type B connector located on the bottom of the unit that is used for
Command Line Interface (CLI) from the PC to the OSD2251P via the PC's USB connector. See
section 2.5 for further CLI information.
USB Type B - CLI Port
FIGURE 7: USB TYPE B CLI PORT
To operate and control the OSD2251P using the CLI an OSD2251P driver will be required to be
installed onto the PC being used. The driver can be found on the included CD or on the OSD website.
Please contact OSD sales if the driver cannot be found or installed. For Windows XP, Vista and
Windows 7: CP210x_VCP_Win_XP_S2K3_Vista_7.exe. For Windows 2000:
CP210x_VCP_Win2K.exe
DOC ID: 10115303
PAGE 13
OSD2251P OPERATOR MANUAL