Osd2251P Port Allocation - Optical Systems OSD2251P SERIES Operator's Manual

1.4

OSD2251P PORT ALLOCATION

Front Panel: There are two fixed copper ports for 10/100/1000Base-T and two SFP ports.
Top Panel: The top panel consists of a 4-way 5.08mm terminal block power connector and a 4way
3.5mm terminal block alarm connector.
Bottom Panel: 4-Way DIP switch, Type-A USB connector and a Type-B USB connector.
Each section will be described further throughout this manual.
Front Panel
Top Panel
Bottom Panel
PAGE 8
OPTICAL SYSTEMS DESIGN
FIGURE 2: OSD2251P PORT ALLOCATION
OSD2251P OPERATOR MANUAL
Copper Port 1
Copper Port 2
SFP Port 3
SFP Port 4
Alarm Port
Power Port
Configuration Port
Console Port
Program Port
DOC ID: 10115303