Table of Contents
Advertisement
OPTICAL SYSTEMS DESIGN
2.2.5
USB CONNECTOR
The OSD2244 has a USB – Type B connector located on the rear of the unit that is used for Command
Line Interface (CLI) from the PC to the OSD2244 via the PC's USB connector. See section 2.5 for
further CLI information.
USB Type B - CLI Port
FIGURE 6: USB TYPE B CLI PORT
To operate and control the OSD2244 using the CLI an OSD2244 driver will be required to be installed
onto the PC being used. The driver can be found on the included CD or available on the OSD website.
Please contact OSD sales if the driver cannot be found or installed. For Windows XP, Vista and
Windows 7: CP210x_VCP_Win_XP_S2K3_Vista_7.exe. For Windows 2000:
CP210x_VCP_Win2K.exe
FIGURE 7: WIN XP INSTALLATION
DOC ID: 10108207
PAGE 12
OSD2244 OPERATOR MANUAL
Advertisement
Table of Contents
