Programming Individual Lighting Channels; Before Programming; Set On/Off Times; Program Moonlight Duration - Current Orbit Marine PRO LED Light Quick Installation Manual

With 24 hour ramp timer pro led controller

Detailed Programming Instructions

The following detailed steps will guide you through customizing and programming your Ramp Timer Pro.

Please be sure to follow our Quick Installation Guide and set the clock before following the below steps.

Programming Individual Lighting Channels

The Ramp Timer Pro features two channels of lighting which can be independently controlled. Channel 1/Line 1 should be connected to your

blue spectrum lights for dawn/dusk/actinic/moon lighting; Channel 2/Line 2 should be connected to your white spectrum lights for daylight.

SUNRISE/SUNSET FADE - The duration of the ramp up and dim down (0-30 minutes)

This will reset the controller memory for all four memory settings.

Page 4

To reset the memory settings to the factory default, press DEFAULT

for 5 seconds (see pg. 5).

Default

Table of Contents