1. Remote Controller
[PAC-YT53CRAU]
Once the operation mode is selected, the unit will remain in the selected mode until changed.
(1) Remote Controller Buttons
Backlit LCD
TEMP. button
MODE button
Keep the remote controller out of direct sunlight to ensure accurate measurement of room temperature.
•
The thermistor at the lower right-hand section of the remote controller must be free from obstructions to
•
ensure accurate measurement of room temperature.
To set the functions that are not available on this controller (PAC-YT53CRAU), use MA remote controller or
•
the centralized controller.
Specifications are subject to change without notice.
ON/OFF lamp
The lamp will light up in green when
turned on, and blink during startup
and when an error occurs.
ON/OFF button
Pressing this button starts and
stops the operation.
.
FAN button
VANE button
7
© 2017 Mitsubishi Electric US, Inc.