Address Switch Setting - Mitsubishi Electric PVFY-P12 Service Manual

3, Address switch setting

Make sure that power to the unit is turned off.
(B)
ON
OFF
(A) Indoor unit control board
(B) Factory setting (all models)
1. Address settings vary in different systems.
Refer to the section on address setting in the outdoor unit installation manual.
2. Address is set with a combination of SW12 (10's digit) and SW11 (1's digit).
To set the address to "3," set SW12 to "0" and SW11 to "3."
To set the address to "25," set SW 12 to "2" and SW 11 to "5."
Specifications are subject to change without notice.
(A)
ON
OFF
34
© 2017 Mitsubishi Electric US, Inc.