User Guide; Changing/Installing The Cells - extronics iCAM502 Safety Instructions

Application Duracell
MN1500
ATEX/IECEx OK, T4 at
o
GROUP II 60
ATEX/IECEx OK, T4 at
o
GROUP I 60

2 User guide

2.1 Changing/installing the cells

To change or install the cells in the iCAM502 turn the screw as indicated below to
remove the cover.
Install the cells in the correct orientation (indicated on the enclosure) and close the lid
again.
Operating Manual
Duracell
Industrial
ID1500
OK, T4 at
o
C 60 C
OK, T4 at
o
C 60 C
Table 1 iCAM502 cell usage table
screw anti-clockwise, the
To close it again, turn the
To close it again, turn the
coin clockwise, the screw
coin clockwise, the screw
should click into place once
Energizer
E91
OK, T3 at
o
60 C
CANNOT
BE USED
Use a coin to turn the
lid should then pop up.
should click into place
correctly seated.
once correctly seated.
5
Panasonic
LR6XWA
OK, T3 at
o
60 C
CANNOT
BE USED