RS34 - RS48 - RS59 ® BEAST SAFETY Damage Prevention and Information Messages It is extremely important that you A Damage Prevention Message is to read and understand all of the inform the user of important information safety instructions, the operating...
Page 4
RS34 - RS48 - RS59 ® ing area well lit. not wear loose clothing that can poten- • CHILDREN SHOULD BE KEPT AWAY tially get caught in moving parts of the FROM THE WORKING AREA equipment. It is recommended to wear...
Page 5
RS34 - RS48 - RS59 ® owner’s manual for determining what to a complete stop. It is important to are the recommended accessories to always turn the power tool OFF when use with this type of equipment. Using leaving the work area or when a cut is accessories that are not recommended finished.
RS34 - RS48 - RS59 ® • KEEP AWAY FROM MOVING PARTS cement and other masonry products It is important to keep hands, • Arsenic and chromium, from chemically feet, hair and clothing away from treated lumber all moving parts to prevent injury.
Page 7
RS34 - RS48 - RS59 ® risk of electric shock. The equipment- WARNING: To avoid the possi- grounding conductor is the insulated bility of the machines plug or conductor that has an outer surface electrical outlet getting wet, posi- tion the saw to one side of a wall that is green with or without yellow mounted outlet.
RS34 - RS48 - RS59 ® WARNING: It is important to not ing when changing cutting abuse the extension cord and do blades and cleaning. not yank on any cord to discon- • Use the machine only with nect it from the outlet.
RS34 - RS48 - RS59 ® Water pump Blade guard sure most water flows back in the water container. UNPACKING & SETTING UP Unpacking and Assembly • Unpack the tile saw and inspect for Cutting table Saw spindle any damaged parts.
RS34 - RS48 - RS59 ® Setting the Cutting Depth Motor protection The motor is equiped with a thermal safety CAUTION: By loosening the switch for protection against an overload. knob the saw head can When the motor gets overheated, the...
RS34 - RS48 - RS59 ® OPERATING INSTRUCTIONS • Position the cutting head at the desired height Single Step Cutting • Hold the material with one hand while DO NOT FORCE THE TOOL! It will do making sure your hand is free from the the job better and safer at the rate for cutting blade.
RS34 - RS48 - RS59 ® MAINTENANCE & TROUBLE- Diamond blade dressing SHOOTING Diamond blades performs best when they are dressed. After time and use, diamonds General Maintenance on the outer edge of the blade might beco- • The cooling water should be replaced me glazed or dull.
RS34 - RS48 - RS59 ® Troubleshooting The machine does - The power supply cable is - Press the plug firmly in the power not work. damaged or not properly outlet. Check the power supply connected. cable. - No voltage in the power outlet.