Table of Contents
Advertisement
AMPLIFIER
TV
7
6
5
DIGITAL AUDIO OUT
STEREO OUT
VIDEO OUT
PCM/MPEG2/AC3/DTS
L
R
(CVBS)
OPT OUT
DIG OUT
AUDIO
VIDEO OUT
S-VIDEO OUT
Connecting to optional equipment
Connecting to an amplifier equiped with two channel
analog stereo
Connect the audio Left and Right output sockets to the
corresponding sockets on your amplifier, receiver or stereo system.
For this use the audio cable supplied (5).
Connecting to an amplifier equiped with two channel
digital stereo (PCM)
1
Connect the player's digital audio output (optical 7 or coaxial 6) to the
corresponding input on your amplifier.
For this use an optional digital (optical 7 or coaxial 6) audio cable.
2
You will need to activate the player's digital output (see 'Personal
Preferences').
Connecting to an A/V receiver with multi-channel
decoder (Dolby, MPEG 2 and DTS)
I
I
AUX-
/O
Digital Multi channel sound
Digital multi channel connection provides the optimum sound quality. For
II
TO TV-
I
/O
this you need a multichannel A/V receiver that supports one or more of
(Y/C)
the audio formats supported by your DVD player (MPEG 2, Dolby Digital
(AC3) and DTS). For this you can check the receiver manual and the logos
on the front of the receiver.
1
Connect the player's digital audio output (optical 7 or coaxial 6) to the
corresponding input on the receiver using an optional digital (optical 7 or
coaxial 6) audio cable.
2
You will need to activate the player's digital output (see 'Personal
Preferences').
Note: If the audio format of the digital output does not match the capabilities
of your receiver, the receiver will produce a strong, distorted sound.The audio
format of the DVD disc in play is displayed in the Status Window, when
changing the language.
6 Channel Digital Surround Sound via digital connection can only be obtained
if your receiver is equipped with a Digital Multichannel decoder.
PREPARATION 15
Advertisement
Table of Contents
