Inserting Batteries Into The Remote Control - Philips DVD743 User Manual

Preparation
If you connect to an active subwoofer,
1
Connect the SUBWOOFER AUDIO OUT on
the DVD player to an optional active subwoofer.
2
The subwoofer reproduces the low bass sound
effects (e.g. explosions, the rumble of spaceships,
etc.).
3
Be sure to follow the instructions supplied with
the subwoofer.
Notes:
– If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
– To see the selected audio format of the
current DVD in the Status Window, press SYSTEM
MENU.
– MP3 Audio is not available on the Digital
Output.
Inserting batteries into the
Remote Control
1
Open the battery cover.
2
Insert batteries (AA size) with the correct
polarity as indicated by the + and - symbols
inside the battery compartment.
3
Close the cover.
CAUTION!
– Remove batteries if they are exhausted
or not to be used for a long time.
– Do not use old and new or different
types of batteries in combination.
– Batteries contain chemical substances,
so they should be disposed off properly
and kept away from children.
Using the Remote Control
G Direct the remote control at the remote sensor
of the DVD player.
G Do not drop the remote control.
G Do not leave the remote control near extremely
hot or humid place.
G Do not spill water or put anything wet on the
remote control.
- +
+ -
12