the dishes accumulate in the dishwasher. When you
put in only a partial load, use the RINSE& HOLD
cycle to rinse off heavy soils. Be sure to latch the
door when waiting for a full load. This helps to keep
soils moist, easier to remove.
Always select the cycle that uses the least amount
of water that will remove the soil from the load.
Turn your water heater down to deliver 120°F.
water to your dishwasher and use the WASH HEAT
BOOST Option. Make sure the entering water
temperature is no less than 120°F. (See How to
Test Water Temperature section.)
ENERGY-SAVING T~S
Select a SOIL OPTION that will remove soil
from load.
If you don't need your dishes right away, use your
HEATED DRY off (Energy Saver) feature that
turns the drying heater off automatically. Dishes
dry naturally over a longer period such as overnight.
Watch the SYSTEMS MONITOR for more ideas.
See Systems Monitor section.
5
Need help?
Do you have a question about the ZBD3000 and is the answer not in the manual?