Philips DVD712 Owner's Manual page 14

Digital video disc player
Hide thumbs Also See for DVD712:
Table of Contents

Advertisement

14 Hookups (cont'd)
Connecting to a TV and a Multi-channel Receiver that has 2-channel digital
stereo (PCM) or supports Dolby Digital
Receiver
(example only)
COAXIAL DIGITAL
AUDIO IN
1
Connect one of the DVD Player's DIGITAL AUDIO OUT
jacks (COAXIAL or OPT(ical) OUT) to the corresponding
digital audio in jack on your Stereo Receiver. You only need
one connection. Use a digital audio cable (not supplied).
2
Connect an S-Video cable to the S-VIDEO OUT jack of the
DVD Player and to the corresponding S-VIDEO IN jack on
your TV. Or, use the CVBS VIDEO OUT jack (using the supplied
yellow video cable) or Component VIDEO OUT jacks. Details are on
pages 10 and 12. You only need one video connection.
3
You may connect a subwoofer (not supplied) to the SUB
WF. OUT jack on the DVD Player. Follow the instructions sup-
plied with the subwoofer.
4
Connect the power cords of all the equipment to power
outlets. Turn on the power of the TV, Stereo Receiver, and
DVD Player.
5
Set the TV to the correct Video In channel. These channels
often are near channel 00. See your TV manual. Or, change TV
channels until you see the DVD logo on the TV screen.
Set your Stereo Receiver to the correct Audio In channel or
sound source. Refer to the Stereo's manual.
6
Set the DVD Player's digital output. Details are on page 45.
1
DIGITAL AUDIO OUT
1
PCM-MPEG2-Dolby Digital-DTS
L
2
R
COAXIAL
OPT OUT
SUB WF OUT
AUDIO OUT
TM
, MPEG2, or Digital Theater System
Back of TV
(example only)
2
S-VIDEO IN
1
2
P
/C
P
/C
Y
L
(CVBS)
R
R
B
B
(Y/C)
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
• If your Digital Output setting
does not match your Stereo's
capabilities, the Stereo may
produce a strong, distorted
sound or no sound at all.
• Six Channel Digital Surround
Sound via digital connection can
only be obtained if your Stereo
has a Digital Multichannel
Decoder.
• Your Stereo must support
MPEG2, Dolby Digital
Digital Theater System (DTS).
Check the Stereo's manual.
• When playing MP3 files, you
may not hear sound if you used
the DIGITAL AUDIO OUT jacks.
See page 40 for details.
S-Video In
Helpful Hints
TM
or

Advertisement

Table of Contents
loading

Table of Contents