Philips DVD712 Owner's Manual page 12

12 Hookups (cont'd)
TV has a single (CVBS) Video In jack
1
Connect the yellow (CVBS) VIDEO OUT jack of the DVD
Player to the corresponding VIDEO IN jack on your TV.
Use the supplied yellow video cable.
2
Connect the supplied red and white audio cables to one
set of the Left and Right AUDIO OUT jacks on the DVD
Player. Connect the other end of the cables to the
left/right AUDIO IN jacks on the TV. Match the cable colors
to the jack colors.
3
Connect the power cords of the DVD Player and the TV
to the power outlet. Turn on the power of the TV and the
DVD Player.
4
Set the TV to the correct Audio/Video In channel. Such
channels may be called AUX or AUXILIARY IN,
AUDIO/VIDEO or A/V IN, EXT1 or EXT2, etc. These channels
often are near channel 00. See your TV owner's manual for
details. Or, continue to change channels at the TV until you
see the DVD Player's screen saver on the TV screen.
Connecting to a TV Only
2
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
SUB WF OUT
COAXIAL OPT OUT
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
1
1 1
L
2 2
P /C Y
R R P /C
R L (CVBS) B B
S-VIDEO OUT
AUDIO OUT VIDEO OUT VIDEO OUT
Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
VIDEO IN
(Y/C)