Selecting The Color System That Corresponds To Your Tv; Setting The Tv Display - Philips DVD622 User Manual

Selecting the color system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the color system of
the Disc, the TV and the DVD Player
should match.
1
Press SYSTEM MENU.
2
Press 2 repeatedly to select {VIDEO
SETUP}, then press OK.
3
Press 3 4 to highlight {TV TYPE}.
4
Enter its submenu by pressing OK.
5
Press 3 4 to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
6
Select an item and press OK.
Follow the instructions shown on the
TV to confirm the selection (if any).
If a blank/distorted TV screen appears,
wait for 15 seconds for auto recovery.
TIPS:
To return to the previous menu, press
To remove the menu, press
01-36 DVD622_372

Setting the TV Display

Set the aspect ratio of the DVD Player
according to the TV you have connected.
The format you select must be available
on the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
1
Press SYSTEM MENU.
2
Press 2 repeatedly to select {VIDEO
SETUP}, then press OK.
3
Press 3 4 to highlight {TV DISPLAY}.
4
Enter its submenu by pressing OK.
5
Press 3 4 to highlight one of the options
below:
4:3 PANSCAN –
Select this if you have
a normal TV and want
both sides of the picture to be trimmed
or formatted to fit your TV screen.
4:3 LETTERBOX –
Select this if you have a
normal TV. In this case, a
wide picture with black
bands on the upper and lower portions of
the TV screen will be displayed.
16:9 – Select this if
you have a wide-
screen TV.
6
Select an item and press OK.
OK
.
SYSTEM MENU
17
Getting Started
.
3139 246 14871
18/01/2005, 2:21 AM
17