Connections; Connecting Tv; Using Composite Video Jacks (Cvbs); Using S-Video Jack - Philips DVD622 User Manual

Connections

Connecting TV

COMPONENT
S-VIDEO VIDEO IN
IN
V (Pr/Cr) AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your TV system.
– Connect the DVD system directly
to the TV.
Using Composite Video jacks
(CVBS)
1
Use the composite video cable (yellow) to
connect the DVD Player's CVBS (VIDEO)
jack to the video input jack (or labeled as
A/V In, Video In, Composite or Baseband)
on the TV (cable supplied).
2
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
10
01-36 DVD622_372
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
IN
U (Pb/Cb)
VIDEO IN
Y
1
2
1
2
10
COMPONENT
VIDEO IN
V (Pr/Cr)
U (Pb/Cb)
Y
COMPONENT
VIDEO IN
S-VIDEO
IN V (Pr/Cr) AUDIO
OUT
U (Pb/Cb)
VIDEO IN
Y
1
IMPORTANT!
– S-Video connection provides
better picture quality. This option
must be available on your TV.

Using S-Video jack

Use the S-video cable to connect the
DVD system's S-VIDEO OUT jack to
the S-Video input jack (or labeled as Y/C
or S-VHS) on the TV (cable not supplied).
To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
18/01/2005, 2:20 AM
S-VIDEO
IN
AUDIO
IN
VIDEO IN
2
3139 246 14871