Functional Overview; Front And Rear Panels - Philips DVD622 User Manual

Functional Overview

Front and Rear Panels

STANDBY-ON B
– To switch the DVD Player to Standby
mode or ON
Disc tray
Display
– Shows the current status of the DVD
Player
STANDBY-ON
Mains (AC Power Cord)
– Connect to a standard AC outlet
S-Video Out
– Connect to S-Video input of a TV
YPbPr
– Connect to YPbPr input of a TV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
14
01-36 DVD622_372
– Point the remote control towards this
– Connect to AUDIO inputs of an amplifier,
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
– Connect to CVBS Video input of a TV
14
OPEN/CLOSE /
– Open/Close the disc tray
2; PLAY/PAUSE
– To start or interrupt playback
9 STOP
– To stop playback
IR Sensor
sensor
STOP PLAY/PAUSE OPEN/CLOSE
Audio Out (Left/Right)
receiver or stereo system
digital audio equipment
CVBS (VIDEO Out)
3139 246 14871
18/01/2005, 2:21 AM