b Put the "CSS5235.bin" and
"MCU5235.bin" in the root directory
of the USB device.
3
Connect the USB storage device to the
connector on this product.
4
Switch this product to the HDMI ARC
source, and switch your TV to the HDMI
source.
5
On the remote control, within 6 seconds
twice, and Volume + once, then
press
hold down MOVIE.
» If an upgrade media is detected, on the
TV screen you are prompted to start
the update.
» If an upgrade media is not detected,
an error message is displayed on the
TV screen. Make sure that the latest
software of this product is put in the
USB storage device.
6
Press
to start the update.
7
Wait until the update is completed.
» If the update is complete, this product
automatically turns off and on again.
Caution
•
Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.
EN
Page 15