Philips DVD-762 User Manual page 9

Digital Multi-channel sound
Digital multi-channel connection provides the best sound
quality. For this you need a multi-channel A/V receiver that
supports one or more of the audio formats supported by
your DVD player (MPEG 2, Dolby Digital™ and DTS).
Check the receiver manual and the logos on the front of
the receiver.
AMPLIFIER
G
F
MULTICHANNEL AUDIO OUT
LEFT CENTER
REAR
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
RIGHT SUBW.
COAXIAL OPTICAL
REAR
Note:
– If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a strong,
distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital connection
can only be obtained if your receiver is equipped with a Digital
Multi-channel decoder.
– To see the selected audio format of the current DVD in the
Status Window, press SYSTEM MENU.
TV
Y
Z
X
A
II I AUX/VCR IN
TV OUT
AUDIO OUT
LEFT VIDEO OUT
FRONT L 2
R 1
S-VIDEO
RIGHT
OUT
FRONT
Analog connection to a multi-channel A/V
receiver with 6 Channel connectors (Dolby
Digital / DTS)
This DVD player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
1
Connect an optional audio out jacks for the Center speaker
and the Subwoofer connection (C) to the corresponding in
jacks on your receiver.
2
Connect an optional Left and Right audio out jacks for the
Front speaker (B) to the corresponding in jack on your
receiver.
3
Connect an optional Left and Right audio out jacks for
Surround speaker (D) to the corresponding in jacks on
your receiver.
4
Make the appropriate Sound settings for Analog Output
and Speaker Settings in the Personal Preferences menu.
AMPLIFIER
D C
MULTICHANNEL AUDIO OUT
LEFT
REAR
DIGITAL AUDIO OUT
PCM-MPEG2-Dolby Digital-DTS
COAXIAL OPTICAL RIGHT
REAR
TV
Z Y
X
B
II TV OUT I AUX/VCR IN
CENTER LEFT AUDIO OUT VIDEO OUT
L 2
FRONT
R 1
S-VIDEO
SUBW. RIGHT OUT
FRONT
P
REPARATION
9