Product Description; Front Panel - Philips DCR 2020 User Manual

Product description

Front panel

Q
1 Smart Card slot:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
U
2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 I
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
The front panel button hides the remote control receiver window and includes
two LEDs indicating the receiver status. One of the LEDs blinks at remote control
command reception.
Receiver operating mode
Low Power
Standby
Running in TV mode
Running in Radio mode
TV recording in progress
Radio recording in progress
Recording ongoing during standby
Download in progress
If the red LED is blinking continuously, it indicates that an upgrade of your terminal
software is taking place. Do not interrupt this operation.Wait for the green LED to
light up, indicating successful upgrade, and then continue as normal.
see chapter Inserting your Smart Card
. . . . . . . . . . . . . . . . . . . . . . .
channel +
channel -
mute/demute
ON/"low power"
W
LED1 LED2
red off
off red
off green
off orange
red green
red orange
red red
blinking red off
EN
E R
T
43