Volume & Audio Control; Recording Timers - Philips DCR 2020 User Manual

Volume & Audio Control
Volume control and Mute
To decrease or increase the volume, use
The volume level can also be controlled from your TV.
To mute the sound, press
A change of volume is signalled on-screen using a bar
graph, while audio mute is signalled with an icon in the
top right corner of the screen.
Audio mode
To access audio settings:
- select Setup from the main menu, then select TV
configuration.
- Scroll to TV audio signal and set the desired value
(Stereo, Mono, or Dolby digital).
- Press OK to save your changes and exit the screen.
Audio language
To select your preferred audio language:
- Select User preferences from the main menu, then
select Languages.
- Scroll to Audio Language and set the desired language.
- Press OK to save your changes and exit the screen.
If you want to change the audio mode or language for a
particular programme, press I-II to directly access the
audio options available for this programme. Available
languages depend on the audio content transmitted.

Recording timers

Recording timers are used for VCR or DVD recordings.
Setting a timer from the Guide
- Select Guide from the main menu, or press GUIDE.
- Move to the desired programme using the arrow
keys.
- Press TIMER to set a recording timer on the
selected programme.
- Enter your PIN code if necessary, and then set the
timer as appropriate. By default, the settings
correspond to the selected programme.
- Press OK to confirm.
.
.
EN
53