Philips BDP7200 User Manual page 31

Category Menus
Video HDMI 1080p/fps
Output
• This feature is
available only when
the display device
is connected by an
HDMI cable.
HDMI Video
Resolution*
• This feature is
available only when
the display device
is connected by an
HDMI cable.
• Refer to page 35 for
more information.
HDMI Deep Color
• This feature is
available only when
the display device
is connected by an
HDMI cable, and
when it supports
deep color feature.
Component Output
De-interlacing Mode
Black Level
E5E10UD_EN.indb 31 E5E10UD_EN.indb 31
LIST OF SETTINGS
Options/Sub-Menus
Auto
Off
Auto
480p
720p
1080i
1080p
Auto
Off
480i
480P
720P With regard to the DVD-Video
1080i with a copy protection, the
resolution will be set to 480p
regardless of the setting here.
If 480p output is not available,
480i will be output.
Auto
Video
On
Off
Description
"Auto":
Output the picture in 1080/24p
when it meets all the conditions
listed below:
• The video resolution and the
frame rate of the material is
1080/24p (1080 progressive
with 24 frames per second).
• "HDMI Video Resolution"
setting is set to "1080p".
• The display device supports
the 24p (24 frames per second,
progressive) output.
"Off":
Output the picture in 60p. (60
frames per second, progressive)
Set the resolution of the video
signal being output from the
HDMI OUT.
• The selected resolution must
also be supported by your TV
monitor.
Deep color reduces the
posterization effect of the
playback picture.
"Auto":
Reduces the posterization effect
by automatically outputting the
10 bit color whenever the unit
recognizes the connected display
device supports deep color
feature.
"Off":
Outputs the standard 8 bit color.
Set the resolution for the
component output picture.
• The selected resolution must
also be supported by your TV
monitor.
• Refer also to your TV's manual.
• If you have selected the
resolution not supported by
your TV by mistake and the
picture gets disturbed, press
[B(PLAY)] and hold on the
front panel for 5 seconds to
change the setting back to its
default.
• When HDMI cable is connected,
only "480i" and the resolution
selected in the "HDMI Video
Resolution" will be available.
"Auto":
Automatically detects the film or
the video content, and
appropriately converts it.
"Video":
Select when the picture is
distorted when using "Auto".
Black level enhances the
blackness of the black part of the
playback picture.
EN 31
12/28/2007 9:25:54 AM 12/28/2007 9:25:54 AM