Philips BDP7100/12 Service Manual
Hide thumbs Also See for BDP7100/12:

Advertisement

Quick Links

BLU-RAY DISC PLAYER
Contents
1
2
3
4
5
6
7
© Copyright 2007 Philips Consumer Electronics B.V. Eindhoven, The Netherlands.
All rights reserved. No part of this publication may be reproduced, stored in a
retrieval system or transmitted, in any form or by any means, electronic,
mechanical, photocopying, or otherwise without the prior permission of Philips.
Published by KC-TE 0740 V&MA
Version 1.1
Page
Contents
2
7
3
4
6
7
8
9
10
16
35
37
7
37
38
39
39
40
41
42
43
44
45
8
46
47
9
Printed in he Netherlands
Debug (Main PCB)
Main PCB Component Side-1
Main PCB Component Side-2
Main PCB Conductor Side-2
Front PCB Component Side and
Power Key PCB Component Side and
Subject to modification
BDP7100/12
Page
48
48
49
50
51
52
53
54
55
56
56
57
58
59
60
61
62
63
63
64
65
67
EN 3139 785 32971

Advertisement

Table of Contents
loading

Summary of Contents for Philips BDP7100/12

  • Page 1: Table Of Contents

    Directions for Use 10 Revision List © Copyright 2007 Philips Consumer Electronics B.V. Eindhoven, The Netherlands. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise without the prior permission of Philips.
  • Page 2: Technical Specifications

    EN 2 3139 785 32970 Technical Specifications Technical Specification 1.8.1 Component Video: Outpuy Impedance : 75 Ω General : > -60dB on all output Bandwidth Y : 5.7MHz ± 3dB (480i) Mains voltage : 220V ~ 230V 11.6MHz ± 3dB (480p) Mains frequency : 50Hz 26.1MHz ±...
  • Page 3: Location Pcb Drawing

    Location PCB Drawing 3139 785 32970 EN 3 1.11 PCB Location MAIN PCB S.M.P.S PCB BDP LOADER ASSY...
  • Page 4: Safety Precautions

    EN 4 3139 785 32970 Precautions 2. Precautions 2-1 Safety Precautions 1) Before returning an instrument to the customer, Any measurements not within the limits specified always make a safety check of the entire herein indicate a potential shock hazard that must instrument, including, but not limited to, the be eliminated before returning the instrument to the following items:...
  • Page 5 Precautions 3139 785 32970 EN 5 Precautions 2) Read and comply with all caution and safety 5) Components, parts, and/or wiring that appear to related notes on or inside the cabinet, or on the have overheated or that are otherwise damaged chassis.
  • Page 6: Servicing Precautions

    EN 6 3139 785 32970 Precautions 2-2 Servicing Precautions CAUTION : Before servicing units covered by this (4) An insulation tube or tape is sometimes used service manual and its supplements, read and follow and some components are raised above the the Safety Precautions section of this manual.Note : If printed wiring board for safety.
  • Page 7: Esd Precautions

    Precautions 3139 785 32970 EN 7 2-3 ESD Precautions Electrostatically Sensitive Devices (ESD) CAUTION : Be sure no power is applied to the chassis Some semiconductor (solid state) devices can be or circuit, and observe all other safety precautions. dam-agedeasily by static electricity.Such components commonly are called Electrostatically Sensitive (8) Minimize bodily motions when handling Devices(ESD).
  • Page 8: Handing Optical Pick-Up

    EN 8 3139 785 32970 Precautions 2-4 Handling the optical pick-up The laser diode in the optical pick up may suffer electrostatic breakdown because of potential static electricity from clothing and your body. The following method is recommended. (1) Place a conductive sheet on the work bench (The black sheet used for wrapping repair parts.) Fig.1-3 (2) Place the set on the conductive sheet so that the...
  • Page 9: Lead-Free Requirement

    • On our website www.atyourservice.ce.Philips.com you find more information to:  BGA-de-/soldering (+ baking instructions)  Heating-profiles of BGAs and other ICs used in Philips- sets You will find this and more technical information within the “magazine”, chapter “workshop news”.
  • Page 10: Disassembly Instructions

    EN 10 3139 785 32970 Disassembly Instructions Disassembly and Reassembly Cabinet and PCB CAUTION : Connector Must be removed with care Top Cabinet Removal 1) Remove 5 Screws 1 2. 2) Lift up the Top Cabinet 3 in direction of arrow. 3 SCREWS (3X10 B) TOP CABINET...
  • Page 11 Disassembly Instructions 3139 785 32970 EN 11 3-2 Ass’y Front-Cabinet Removal 1) Release 7 Hooks 1, 2, 3, 4 and Ass’y Front-Cabinet 5. 1 HOOK 2 HOOKS 1 HOOK 3 HOOKS ASS’Y FRONT-CABINET Fig. 3-2 Ass’y Front-Cabinet Removal...
  • Page 12 EN 12 3139 785 32970 Disassembly Instructions 3-3 Ass’y Deck Removal 1) Remove 4 Screws 1 from the Ass’y Deck 2 and lift it up. 4 SCREWS (3X10 W) ASS’Y DECK Fig. 3-3 Ass’y Deck Removal...
  • Page 13 Disassembly Instructions 3139 785 32970 EN 13 3-4 S.M.P.S PCB Removal 1) Remove 3 Screws 1, from the S.M.P.S PCB 2 and lift it up. 6 SCREWS (3X8 W) S.M.P.S PCB Fig. 3-4 S.M.P.S PCB Removal...
  • Page 14 EN 14 3139 785 32970 Disassembly Instructions 3-5 Main PCB Removal 1) Remove 10 Screws 1, 2, 3 from the Main PCB 4 and lift it up. 4 SCREWS (3X6 W) MAIN PCB 1 SCREW (3X6 B) 5 SCREWS (3X10 B) Fig.
  • Page 15 Disassembly Instructions 3139 785 32970 EN 15 3-6 FAN Removal 1) Remove 2 Screws 1 from the Fan 2 and lift it up. 2 SCREWS (5X14 S) Fig. 3-6 FAN Removal...
  • Page 16: Trouble Shooting

    EN 16 3139 785 32970 Trouble Shooting Trouble Shooting NO Power Detected (Stand by LED OFF) F1S01 is normal? Change fuse Refer to Fig. 4-1 C1S01 voltage Change BD1 is normal voltage? Refer to Fig. 4-1 Refer to Fig. 4-1 Switching operation Change IC1S11...
  • Page 17 Trouble Shooting 3139 785 32970 EN 17 Refer to S.M.P.S. PCB COMPONENT SIDE Refer to (Circuit Diagrams) Fig. 4-1...
  • Page 18 EN 18 3139 785 32970 Trouble Shooting There’s no Digital Audio Out Check Check Current Digital Audio the A/V Receiver can Set to Bitstream Setting is PCM. Decode Current Bit-Steam Check the Audio Data at AIC1 Replace the Main PCB (Pin 13) Refer to Fig.
  • Page 19 Trouble Shooting 3139 785 32970 EN 19 DIGITAL AUDIO DATA AIC1 (Pin2,4,6,13) Refer to Main PCB CONDUCTOR SIDE Refer to (Circuit Diagrams) Fig. 4-2...
  • Page 20 EN 20 3139 785 32970 Trouble Shooting There is no Audio Output Check the Audio Replace the main PCB signal at PIN 13,14,15,16 of AIC2 Check Check AIC2 soldering or replace the Audio AIC2 signal at pin1,2,37~48 of AIC2 Check Check AIC4~7 soldering of the Audio peripheral devices...
  • Page 21 Trouble Shooting 3139 785 32970 EN 21 ANALOG AUDIO DATA(AIC4,5,6,7) Refer to Main PCB COMPONENT SIDE-2 Refer to (Circuit Diagrams) Fig. 4-3...
  • Page 22 EN 22 3139 785 32970 Trouble Shooting Disc Ioading error Are Main and deck power OK? Check the power (5v, 12v) the 40pin FFC cable(between main & Reinsert FFC cable correctly deck) inserted correctly? the wave- from of FCON1 PIN 25 Change the Main board normal? (MAIN PCB) Refer to Fig.
  • Page 23 Trouble Shooting 3139 785 32970 EN 23 FCON1 PIN 25 Refer to Main PCB COMPONENT SIDE-2 Refer to (Circuit Diagrams) Fig. 4-4...
  • Page 24 EN 24 3139 785 32970 Trouble Shooting Remote control does not work Remocon battery Change the battery Is the FFC cable (between Re-insert FFC cable correctly Front panel&Main) Check FU3 or change FU3 PIN3 the Front panel PCB SIGNAL OK? Refer to Fig.
  • Page 25 Trouble Shooting 3139 785 32970 EN 25 Remote control eye data FU3 Pin3 Refer to Front PCB COMPONENT SIDE Refer to (Circuit Diagrams) Fig. 4-5...
  • Page 26 EN 26 3139 785 32970 Trouble Shooting No Picture Logo screen is OK ? HDMI? NO LOGO(HDMI) BD/DVD Playback is Component? NO LOGO(Component) NO LOGO CHANGE THE MAIN PCB (CVBS/S-Video)
  • Page 27 Trouble Shooting 3139 785 32970 EN 27 NO LOGO (HDMI) Video selection Check the Video select, accords with cable connection cable connection, TV mode and TV mode? Clock, data and Check MIC1 power input, UX7 SYNC from MIC1 oscillation, Memory interface (HRN1~HRN6) Refer to Fig.
  • Page 28 EN 28 3139 785 32970 Trouble Shooting Digital Video signal MIC1 (HRN1~HRN6) UX7 CLOCK SIGNAL (27MHz) Refer to Main PCB COMPONENT SIDE-2 Refer to (Circuit Diagrams) Refer to (Circuit Diagrams) Fig. 4-6...
  • Page 29 Trouble Shooting 3139 785 32970 EN 29 HDMI OUTPUT DATA HIC6 (pin30,31,33,34,36,37,39,40) Refer to Main PCB COMPONENT SIDE-2 Refer to (Circuit Diagrams) Fig. 4-7...
  • Page 30 EN 30 3139 785 32970 Trouble Shooting NO LOGO (Component) Video selection Check the Video select, cable accords with cable connection connection, TV mode and TV mode? Video output from MIC1 soldering error MIC1 (VE26,27,28) Refer to Fig. 4-8 Video Check VIC3 soldering of output from peripheral devices...
  • Page 31 Trouble Shooting 3139 785 32970 EN 31 Y(Color-bar) Pin (MIC1-VE26) Pb(Color-bar) Pin (MIC1-VE27) Refer to Main PCB COMPONENT SIDE-2 Pr(Color-bar) Pin (MIC1-VE28) Refer to (Circuit Diagrams) Fig. 4-8...
  • Page 32 EN 32 3139 785 32970 Trouble Shooting Y(Color-bar) Pin-VR37 Pb(Color-bar) Pin-VR44 Refer to Main PCB CONDUCTOR SIDE Pr(Color-bar) Pin-VR46 Refer to (Circuit Diagrams) Fig. 4-9...
  • Page 33 Trouble Shooting 3139 785 32970 EN 33 NO LOGO (CVBS, S-Video) Video selection Check the Video select, cable accords with cable connection connection, TV mode and TV mode? Video output from MIC1 soldering error MIC1 (VC2, VC3,VC4) Refer to Fig. 4-10 Video Check VIC1 soldering of output from...
  • Page 34 EN 34 3139 785 32970 Trouble Shooting Y(Color-bar) Pin (MIC1-VC2,VIC1-VR7) C(Color-bar) Pin (MIC1-VC3,VIC1-VR21) Refer to Main PCB CONDUCTOR SIDE CVBS(Color-bar) Pin (MIC1-VC4,VIC1-VR22) Refer to (Circuit Diagrams) Fig. 4-10...
  • Page 35: Firmware Upgrading

    Note: Upgrading the firmware will restore all the user settings to default. 5.1.1. Preparation to upgrade firmware 1. Download the software update from ww.philips.com 2. Unzip the zip-archive file 3. Start the CD Burning software and create a new CD project (data disc) with the following settings:...
  • Page 36 EN 36 3139 785 32970 Fireware Upgrading 5.2. Procedure to reset the settings to initial mode 1. Power up the set without any disc inserted. 2. When the set displays: “HOME MENU”, press and hold the skip forward key on the Front Panel of the set as shown in figure 1. Figure 1 3.
  • Page 37: Block And Wiring Diagram

    Block and Wiring Diagram. 3139 785 32970 EN 37 6-1 All block Diagram...
  • Page 38: Wiring Diagram

    Block and Wiring Diagram 3139 785 32970 EN 38 6-2 Wiring Diagram...
  • Page 39: Circuit Diagrams And Pcb Layouts

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 39 7 Circuit Diagrams and PCB Layouts Circuit Diagrams S.M.P.S (S.M.P.S PCB)
  • Page 40: Smp8634 Ddr Sdram (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 40 SMP8634 DDR SDRAM (Main PCB) Schematic Diagrams...
  • Page 41: Smp8634 Flash Memory (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 41 SMP8634 Flash Memory (Main PCB) Schematic Diagrams...
  • Page 42: Nand Flash, Controller (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 42 Nand Flash, Controller (Main PCB) Schematic Diagrams...
  • Page 43: Smp8634 Power, Decoupling (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 43 SMP8634 Power, Decoupling (Main PCB) Schematic Diagrams...
  • Page 44: Sil9134 Hdmi (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 44 Sil9134 HDMI (Main PCB) Schematic Diagrams HDMI OUTPUT DATA HIC6 (pin30,31,33,34,36,37,39,40) � These are the waveforms of BD-P1400 Digital Video signal Caution There can be some differences (Voltage, Frequency, stc.) among cameras. MIC1 (HRN1~HRN6)
  • Page 45: Hdmi-Cec (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 45 HDMI-CEC (Main PCB) Schematic Diagrams...
  • Page 46: Ethernet Contol (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 46 Ethernet contol (Main PCB) Schematic Diagrams...
  • Page 47: Audio (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 47 Audio (Main PCB) Schematic Diagrams DIGITAL AUDIO DATA AIC1 (Pin2,4,6,13) ANALOG AUDIO DATA(AIC4,5,6,7) � These are the waveforms of BD-P1400 Caution There can be some differ ences (Voltage, Frequency, stc.) among cameras.
  • Page 48: Circuit Diagrams And Pcb Layouts

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 48 SMP8634 GPIO Control, JTAG, Debug (Main PCB) Schematic Diagrams UX7 CLOCK SIGNAL (27MHz) � These are the waveforms of BD-P1400 Caution There can be some differ ences (Voltage, Frequency, stc.) among cameras.
  • Page 49: Mm1757 Analog Video Out (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 49 MM1757 Analog Video Out (Main PCB) Schematic Diagrams These are the waveforms of BD-P1400 � Caution There can be some differences (Voltage, Frequency, stc.) among cameras. Pr(Color-bar) Y(Color-bar) Y(Color-bar) C(Color-bar) CVBS(Color-bar) Pb(Color-bar) Pin (MIC1-VE28,VR46)
  • Page 50: Pata Control (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 50 PATA Control (Main PCB) Schematic Diagrams FCON1 PIN 25 � These are the waveforms of BD-P1400 Caution There can be some differences (Voltage, Frequency, stc.) among cameras.
  • Page 51: Power (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 51 Power (Main PCB) Schematic Diagrams...
  • Page 52: Pci, Etc (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 52 PCI, ETC (Main PCB) Schematic Diagrams...
  • Page 53: Front Interface (Main Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 53 Front Interface (Main PCB) Schematic Diagrams Power...
  • Page 54: Front (Front Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 54 Front (Front PCB) Schematic Diagrams Power Remote control eye data FU3 Pin3 � These are the waveforms of BD-P1400 Caution There can be some differences (Voltage, Frequency, stc.) among cameras.
  • Page 55: Power Key (Power Key Pcb)

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 55 Power Key (Power Key PCB) Schematic Diagrams...
  • Page 56: Pcb Layouts

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 56 PCB Layout Diagrams Layout: Main PCB PCB Diagrams – COMPONENT SIDE LOC.NO UCON1 CEIC1 CEC+CON1 PIC4 PIC3 PIC7 MIC6 MIC9 UIC7 AIC2 AIC6 MIC2 AIC5 AIC4 MIC4 MIC1 PIC1 FPCON1 NIC1 PCI1 HIC6...
  • Page 57 Circuit Diagrams and PCB Layouts 3139 785 32970 EN 57 Layout: Main PCB PCB Diagrams – COMPONENT SIDE UX7 CLOCK SIGNAL (27MHz) FCON1 PIN 25 Y(Color-bar) Pb(Color-bar) Pin (MIC1-VE28) Pin (MIC1-VE27) Pr(Color-bar) Digital Video signal Pin (MIC1-VE26) MIC1 (HRN1~HRN6) HDMI OUTPUT DATA ANALOG AUDIO HIC6 (pin30,31,33,34,36,37,39,40) DATA(AIC4,5,6,7)
  • Page 58 Circuit Diagrams and PCB Layouts 3139 785 32970 EN 58 Layout: Main PCB PCB Diagrams CONDUCTOR SIDE Y(Color-bar) DIGITAL AUDIO DATA Pin (MIC1-VC2,VIC1-VR7) AIC1 (Pin2,4,6,13) C(Color-bar) CVBS(Color-bar) Pin (MIC1-VC3,VIC1-VR21) Pin (MIC1-VC4,VIC1-VR22) Y(Color-bar) Pb(Color-bar) Pin-VR37 Pin-VR44 LOC.NO AIC1 U2505 U2504 HIC7 HIC10 Pr(Color-bar) PIC77...
  • Page 59: Pcb Component Side

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 59 Layout: S.M.P.S PCB PCB Diagrams COMPONENT SIDE LOC.NO IC2S51 IC1S81 IC1S12 IC1S11...
  • Page 60: Pcb Conductor Side

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 60 Layout: S.M.P.S PCB PCB Diagrams CONDUCTOR SIDE...
  • Page 61: Conductor Side

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 61 Layout: Front PCB PCB Diagrams COMPONENT SIDE Remote control eye data FU3 Pin3 CONDUCTOR SIDE...
  • Page 62: Conductor Side

    Circuit Diagrams and PCB Layouts 3139 785 32970 EN 62 Layout: Power Key PCB PCB Diagrams COMPONENT SIDE CONDUCTOR SIDE...
  • Page 63: Exploded View And Service Parts List

    Exploded view and Service Parts List 3139 785 32970 EN 63 8 Cabinet Assembly W001 W348 W348 P003 C015 H003 W009 M210 P001 W271 P030 W344 P025 W001 A001 W009 C001 P006 PCBAL P005 PCBAR...
  • Page 64: Service Parts List

    EN 64 3139 785 32970 Exploded view and Service Parts List BDP7100/12 A001 996510008897 REMOTE CONTROL 996510008911 AV CABLE C001 996510008903 FRONT CABINET ASSY C015 996500042115 COVER, TOP 996510008900 WIRE TREE CONNECTOR 15 PIN F1S01 996510008968 FUSE 2A 250V SLOW-BLOW...
  • Page 65: Directions For Use

    Directions For Use The following except of the Quick Use Guide serves as an introduction to the set. The Complete Direction for the Use can be downloaded in different languages from the internet site of Philips Customer care Center: www.p4c.philips.com...
  • Page 66 EN 66 3139 785 32970 Direction For Use...
  • Page 67: Revision List

    Revision List 3139 785 32971 EN 67 Revision List Version 1.0 *Initial Release Version 1.1 *Changes in Service Parts...

Table of Contents