Table of Contents
Advertisement
Input
Needle position raised
When this function is activated, the needle is positioned at top dead centre after sewing
stops.
Sewing foot raised
When this function is activated, the sewing foot is raised after sewing stops.
Sewing foot raised after thread trimming
When this function is activated, the sewing foot is raised after thread trimming.
Thread trimming
When the function is activated, thread trimming with the pedal function is possible.
Speed
Opens the speed input menu.
When this function is activated, it is possible to sew the seam zone with the set speed,
irrespective of the pedal setting.
Seam end with pedal
When this function is activated, the seam end is initialised manually with the pedal.
Reverse sewing direction
When this function is activated, the corresponding seam zone is sewn in reverse.
Sewing stop
When this function is activated, sewing stops automatically at the end of the seam zone.
Seam zone end with sensor
Opens the menu for entering the seam depth and the correction value for corner stitches,
see chapter 11.02.02 Entering the seam depth.
When this function is switched on, the sensor recognises the seam end automatically.
Seam zone end with stitch counting
Opens the menu for entering the number of stitches for the current seam zone.
When this function is activated, the seam zone end is initialised by the stitch counting
function.
Select seam zones
This function is used to select the seam zones of the current seam program.
Current seam zone
Display and selection of the current seam zone using the number keys.
Sewing mode
Quit the seam program input mode and call up the sewing mode.
45
Advertisement
Table of Contents
