Table of Contents
Advertisement
10
Sewing
In the sewing mode a difference must be made between manual sewing and programmed
sewing. In the manual sewing mode, in addition to the functions such as edge guide, stitch
length, seam securing, needle functions, presser foot functions and seam end conditions,
the parameter for securing seams are also displayed and can be altered directly. The current
seam lock parameters also apply in programmed sewing. The change from programmed to
manual sewing and vice versa is effected with the program number selection function.
10
Manual sewing
.01
In the manual sewing mode all the parameters necessary for the sewing operation can be
changed directly. The manual sewing mode is selected with the program number selection
function, see chapter 9.11 Selecting the seam program. The selection of the manual sew-
ing mode is shown by the symbol of a hand on the display instead of the program number.
O Switch the machine on.
O Select the manual sewing mode, see chapter 9.11 Selecting the seam program.
Description of the functions
Seam program selection
Opens the menu for entering the seam program number or for selecting the manual sewing
mode, see chapter 9.11 Selecting the seam program.
Edge guide position
Opens the menu for entering the edge guide position, see chapter 9.07 Entering the edge
guide position.
Stitch length
Opens the menu for entering the stitch length, see chapter 9.06 Entering the stitch length.
Number of stitches for the start and end backtacks
With the use of this input area the number of stitches for the start and end backtacks are
entered, see chapter 9.08 Entering the start and end backtacks.
Sewing
39
Advertisement
Table of Contents
