Table of Contents
Advertisement
Sewing
Start backtack
Switches the start backtack function on or off.
End backtack
Switches the end backtack function on or off.
Needle position raised
When this function is activated, the needle is positioned at top dead centre after sewing
stops.
Sewing foot raised
When this function is activated, the sewing foot is raised after sewing stops.
Seam end with pedal
When this function is activated, the seam end is initialised manually with the pedal.
Seam end with sensor / compensation stitches
Opens the menu for entering the compensation stitches, see chapter 9.09 Entering the
number of compensation stitches.
When this function is switched on, the seam end is initialised automatically with the edge
sensor.
Sewing foot raised after thread trimming
When this function is activated, the sewing foot is raised after thread trimming.
Thread trimming
When the function is activated, thread trimming with the pedal function is possible.
Backtack suppression
When operated, the next bartack is suppressed.
Input mode
Calls up the input mode.
O Sewing is carried out using the pedal functions, see chapter 7.03 Pedal.
40
In addition, when the bobbin thread monitoring function is activated, the
number of remaining stitches is shown, and when the speed display function
is activated the current speed is shown, see chapter 11.04.03 List of
parameters.
Advertisement
Table of Contents
