Functional Overview; Front And Rear Panels - Philips 434 User Manual

Front and Rear Panels

STANDBY-ON B
– To switch the DVD Player to Standby
mode or ON
Disc tray
OPEN/CLOSE /
– Open/Close the disc tray
Display
– Shows the current status of the DVD
Player
Mains (AC Power Cord)
– Connect to a standard AC outlet
CVBS (VIDEO Out)
– Connect to CVBS Video input of a TV
YPbPr (Component Video Out)
– Connect to YPbPr input of a TV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
01-39 xDV434_Eng_191

Functional Overview

– Point the remote control towards this
– Connect to AUDIO inputs of an amplifier,
COAXIAL (Digital audio out)
– Connect to coaxial AUDIO input of a
13
IR Sensor
sensor
2; PLAY/PAUSE
– To start or interrupt playback
9 STOP
– To stop playback
TV OUT
– Connect to Scart input of a TV
Audio Out (Left/Right)
receiver or stereo system
digital audio equipment
3139 246 16611
13/04/05, 1:49 PM
13