Subscribe to Our Youtube Channel
Related Manuals for Jet 505483
Summary of Contents for Jet 505483
- Page 1 Pneumatic Extended Cut-Off Tool #505483, JAT-483 Operation & Parts Manual M-505483 Edition 1 11/2016 427 New Sanford Road LaVergne, TN 37086 Ph.: 800-274-6848 www.jettools.com Copyright © 2016 JET...
-
Page 2: Safety Warnings
Do not use this tool for other than its intended medication. use. If used for other purposes, JET disclaims 15. Adopt a comfortable posture with proper any real or implied warranty and holds itself... - Page 3 23. Shut off air supply and discharge any residual 34. Do not lubricate the tool with combustible pressure from tool before removing hose, liquids, such as kerosene, diesel or jet fuel. making adjustments, changing accessories, 35. Do not dispose of this tool with normal or storing tool.
-
Page 4: About This Manual
As with any tool operation, safety of operator and bystanders should be first priority. If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site: www.jettools.com. -
Page 5: Tool Specifications
Specifications were current at time of publication, but because of our policy of continuous improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring obligations. -
Page 6: Setup And Assembly
Allow lock bar to re-engage with an Any missing parts or damage should be reported audible “click.” ® immediately to your JET distributor. Do not use a damaged tool. Read this instruction manual Grip tool with both hands and push safety thoroughly for operation, maintenance and safety lever forward to release throttle lever. - Page 7 Lubrication Information Use a light oil containing rust inhibitors, such as SAE #10. Many JET air tools have integral oil If the air tool is not performing according to reservoirs, which should be kept filled when in-line specifications, the following are among the most oilers are not used.
- Page 8 Figure 2 Recommended arrangement of air piping and air line system JAT-483 Extended Cutoff Tool...
- Page 9 Troubleshooting JAT-483 Extended Cut-off Tool Any disassembly of the tool should be done by qualified service personnel. For problems not addressed below, contact JET technical service at 800-274-6846. Problem Possible cause Remedy Tool will not start. Air valve closed or obstructed.
- Page 10 #505483, JAT-483 Extended Cut-Off Tool – exploded view JAT-483 Extended Cutoff Tool...
- Page 11 #505483, JAT-483 Extended Cut-Off Tool – parts list Index Part No. Description Index Part No. Description JAT480-01 Motor Housing JAT483-38 Roller Shaft SM-30102 Spring Pin 3x24L JAT483-39 Spring JAT480-03 Air Inlet 1/4-18 NPT JAT483-40 Washer JAT480-04 Throttle Lever JAT483-41 Washer...
-
Page 12: Replacement Parts
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET. Some parts are shown for reference only, and may not be available individually. JAT-930 Cut-off Tool... -
Page 13: Warranty And Service
Accessories; Shop Tools; Warehouse & Dock products; Hand Tools; Air Tools NOTE: JET is a division of JPW Industries, Inc. References in this document to JET also apply to JPW Industries, Inc., or any of its successors in interest to the JET brand. - Page 14 This page intentionally left blank. JAT-930 Cut-off Tool...
- Page 15 This page intentionally left blank.
- Page 16 427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.jettools.com JAT-930 Cut-off Tool...
Need help?
Do you have a question about the 505483 and is the answer not in the manual?
Questions and answers