Advertisement
4)
Configure the rules for the WLAN, and click NEXT.
Note: If you keep the default value to activate the Access Point such as
above screen, the wireless function will be available even without the
external antenna because of an additional printed antenna. For wireless
security, it is recommended to adopt some of the protection measures
such as below.
a)
If you don't want to use the wireless function, just deactivate the
Access Point to forbid wireless station to associate with the access
point.
b)
Change the wireless network name of SSID, and turn off the
Broadcast SSID so that only stations that have the SSID can be
connected.
c)
Select an Authentication Type and set an encryption key.
Figure 9
Figure 10
6
Advertisement
