Cleaning
Blow dirt and dust out of the main housing with
WARNING:
dry air as often as dirt is seen collecting in and around the
air vents. Wear approved eye protection and approved
dust mask when performing this procedure.
Never use solvents or other harsh chemicals
WARNING:
for cleaning the non-metallic parts of the tool. These
chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap.
Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
Optional Accessories
Since accessories, other than those offered
WARNING:
by D
WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only D
accessories should be used with this product.
Consult your dealer for further information on the appropriate accessories.
ACCESSORY CHART
Max.
Min.
[mm]
Rotation
[mm]
[min.
]
-1
D
b
d
d
230 6 22,23
6,600
D
b
WALT recommended
e
Periphical
Threaded
speed
hole length
[m/s]
[mm]
80
-
Max.
Min.
[mm]
Rotation
[mm]
[min.
D
b
d
D
180
-
-
8,500
d
75 30 M14
8,500
b
D
180 12 M14
8,500
D
230 12 M14
8,500
Protecting the Environment
Separate collection. This product must not be disposed of with
normal household waste.
12
Periphical
Threaded
speed
hole length
-1
]
[m/s]
[mm]
80
-
45
20.0
80
20.0
80
20.0