Canon imageclass LBP251dw Getting Started page 12

Setting the Access Point Manually
1
Check the SSID or network key for a Wireless LAN
Router/Access Point.
• Check the label on the Wireless LAN router.
• You can check the SSID or the network key using "Canon
MF / LBP Wireless Setup Assistant," which is included in
the provided DVD-ROM supplied with the machine.
If the information of the wireless LAN router is not
displayed, click [Refresh]. If the information is not
displayed when you click [Refresh], check if the computer
settings for a wireless LAN router (access point) are
complete.
2
Write down the name of the SSID and network key
displayed in step 1. When multiple access points are
displayed, write all SSIDs that are displayed.
SSID
It is sometimes written as name of network, or name of an
access point. If there are multiple SSIDs, please write down
them all.
Network Key
It is sometimes written as PIN, WEP key, WPA/WPA2
passphrase, PSK or preshared key.
En
3
Select <Menu> in the Home Screen.
• LBP253dw
Press and tap <Menu>.
• LBP251dw
Press on the operation panel.
4
Select <Network Settings>.
If a screen appears prompting you to enter a System
Manager PIN, enter the correct PIN using the numeric
keys, and select <Apply>.
12
SampleABCD WEP 01234567890123456789ABCDEF
SampleEFGHIJ WPA-PSK 543210EDCBA
SampleK WPA2-PSK 1234ABCD
5
Select <Wireless LAN Settings>.
6
Read the message that is displayed, and select
<OK>.
7
Select <SSID Settings>.
8
Select <Select Access Point>.
SSID Settings
Select Access Point
Enter Manually
9
Select a wireless LAN router.
If multiple matched SSIDs are displayed, select the ID that
is listed first (the one with the strongest signal).
10
Enter the network key that you have written
down.
Enter the network key using the numeric keys, and
select <Apply>.
WEP Key (5-26 Characters)
XXXXXXXXXXXXX
A/a/12 #
Apply
11
Select <Yes>.
12
After the <Connected.> screen is displayed, wait
until the Wi-Fi indicator stops blinking and turns on.
13
Wait approximately 2 minutes after the
connection.
IP address is set during this period of time.
When an error message appears:
Select <OK> to close the screen, check whether the
network key is correct, and then retry the settings.
If the access point cannot be detected even after
retrying, see the following.
e-Manual "When an Error Message Appears"
To set IP address manually:
e-Manual "Connecting to a Wireless LAN"
A