Panasonic KX-TGP600 Administrator's Manual page 3

KX‐TGP600 Software File Version 01.129 or later
1. 4.5.4 VoIP Settings [Line 1]–[Line 8]
Change the followings in
(Before)
Value Range
(After)
Value Range
2. 5.3.2 Handset Registration Settings
Add the following configuration parameter.
NEXT_REGISTERED_HS_NUMBER
Value Format
Description
Value Range
Default Value
3. 5.3.12 XSI Settings
Add the following configuration parameter.
XSI_PHONEBOOK_CYCLIC_INTVL
Value Format
Description
Value Range
Default Value
XSI_PHONEBOOK_RESYNC_DURATION
Value Format
Description
Value Range
Default Value
"SRTP Mode" on page 136
• SRTP
• RTP/SRTP
Note
• When RTP/SRTP is selected, operation is in RTP mode.
• SRTP
• RTP/SRTP
Note
• When RTP/SRTP is selected, operation is in RTP mode.
• RTP/SRTP: Use only RTP for outgoing calls, and RTP or SRTP for incoming calls.
INTEGER
Specifies the handset number to register or deregister.
・0: The handset number will be registered in order starting with the lowest available
number. (1 to 8)
・1-8: If the specified handset number is already registered, it will be deregistered.
If the specified handset number is not registered, it will be registered.
Note
If the handset IPEI parameters are registered on a base unit, this setting is invalid.
0 - 8
(0: Normal order, 1: handset 1, 2: handset 2, ... 8: handset 8)
0
INTEGER
Specifies the interval, in minutes, between periodic checks for updates
of the Xsi Directory (Phonebook) files.
If this parameter is set to "0", the timing is the same as updating the
configuration files.
0–40320
0
INTEGER
Specifies the time range, in minutes, during which connected units can access the server.
Xsi Directory (Phonebook) files will be downloaded at a random time within this range.
0–1439
0