Table of Contents
Advertisement
For Windows NT, 2000, and XP:
The following steps show an alternative way of obtaining the MAC address
and IP address for your Ethernet adapter.
1. Click on Start and Run. In the Open field, enter cmd. Press the Enter key
or click the OK button.
2. In the command prompt, enter ipconfig /all. Then press the Enter key.
3. Write down the Physical Address as shown on your computer screen; it is
the MAC address for your Ethernet adapter. This will appear as a series of
letters and numbers.
Note: The MAC address is also called the Adapter Address.
The example in Figure E-4 shows the IP address of your Ethernet adapter
as 192.168.100.10. Your computer may show something different.
39
NETGEAR CG814WH Wireless Cable Modem Gateway
Figure E-4
Advertisement
Table of Contents
